Noisy Rotor or normal?

[sworn_enemy]

Hi everyone

I'm really new in having automatic watches, specially Reps. So I ask if the sound from the rotor is normal or it's too noisy. I tried to oil a little bit in the middle in the bearing with two little drops but still the same. If the rotor turns slow (as you can see in the video) I hear nothing. If it moves faster then it's noisy.
Just want to ask if this is normal. I also have an automatic IWC but there i hear nearly nothing.

You think this is normal:
http://sendvid.com/qe9pfkjx

http://sendvid.com/m6sl28iv

Thank you

 

[DreadPirateRobert]

@sworn_enemy

I can't watch the video since i'm on my work computer. Is this a 21j rep? What watch is it?

 

[Rx4Time]

That is unidirectional wind, so the freespinning rotor in the non wind direction is normal. Should be a 7753, although the TD states in as a 7750

 

[Rx4Time]

You will see a similar occurring free spin with the 7750. Completely normal.

 

[d4m.test]

It is exactly this watch:
https://puretime03.com/big-bang-evo...mic-bezel-on-black-rubber-strap-hub4104.html#

 

[innocenti]

I know that it's annoying for me with my watches that do it

 

[pechspils]

Normal.

 

[DreadPirateRobert]

It is exactly this watch:
https://puretime03.com/big-bang-evo...mic-bezel-on-black-rubber-strap-hub4104.html#

Yes, its completely normal. If you had a closed caseback perhaps you could pad the inside of it to reduce noise, clearance permitted, however on this you'll have to deal with the noise. I have a Daytona with the same issue.

 

[d4m.test]

Ok perfect. Thank you all very much for your answer!

I really like the watch. Very good quality. Love this one!

Gesendet von meinem SM-G950F mit Tapatalk

 

[d4m.test]

I hear it, that's a little too noisy, what movement did you have in that BB? 7750??

 

[d4m.test]

I hear it, that's a little too noisy, what movement did you have in that BB? 7750??

Yes, should be a 7750.

 

[champ_21]

I got a Swiss movement in my HBB and it makes a little noise but not as much as yours. Don't think I would be able to hear it in an audio clip