Newbie with Hublot

[jaybyname]

Hi all.

Avid collector in the making!

Just revamping my Hublot Big Bang with a new bezel as I scratched the original one. Stipped the entire watch so i can clean and all screws came out great. Then I got to the bezel screws (6) and each one is really stiff. To the point where I bent the tip of the H screwdriver. Does anyone know if these bezel screws are fake or could they be just really tight? Its a AAA clone

 

[eBoy]

Hello and WELCOME from the official RWI reception desk!

You are receiving this introduction because you either posted in the "new members say hi" section or —for the first time(s)— elsewhere. In the latter case, consider introducing yourself in the aforementioned section.

If you haven't already, please make sure to read all relevant sticky threads. They contain important and essential information such as the forum rules! Most importantly the sales rules, because you will NOT yet be eligible / allowed to sell unless you meet certain criteria / are certified first.

A good starting point is this list of resources on RWI:

New Members - WELCOME! Must reads and interesting info, START HERE!

Welcome to RWI! :) Here are some links with interesting information and must-reads, that helped me a lot in the beginning. Hope it will do the same for you! Start reading, there is a lot of interesting information available. Forum Terms & Abbreviations, what do they mean: this will make...

forum.replica-watch.info

Please also take another look at this important sticky that you should already have seen after logging on for the first time:

You are welcome

If you've just joined and are reading this, welcome to RWI. If you stop here, or read just the next few lines, that's on YOU, but don't ever say you weren't warned. If you are approached by ANYONE, absolutely ANYONE, offering you a watch, or a deal, via Private Message (PM), exercise common...

forum.replica-watch.info

This quick anti-fraud guide is essential if you are about to order from a dealer for the first time:

THE QUICK RWI ANTI-FRAUD GUIDE FOR PEOPLE WHO DON'T LIKE TO READ

THE QUICK RWI ANTI-FRAUD GUIDE FOR PEOPLE WHO DON'T LIKE TO READ, BUT WANT TO BUY A REPLICA: Intro: This guide is supposed to serve as a fast reference sheet for newbies to get a quick scam prevention overview over the most important things to consider before buying a rep. Remember: You need...

forum.replica-watch.info

If you need any further assistance, feel free to contact me or @Feefo!

We will gladly help, but please allow some time for PM responses as we have lifes outside of RWI!

 

[eBoy]

 

[jaybyname]

Is this a link?

 

[trustytime]

Hi all.

Avid collector in the making!

Just revamping my Hublot Big Bang with a new bezel as I scratched the original one. Stipped the entire watch so i can clean and all screws came out great. Then I got to the bezel screws (6) and each one is really stiff. To the point where I bent the tip of the H screwdriver. Does anyone know if these bezel screws are fake or could they be just really tight? Its a AAA clone

If it is a high end model Hublot, the bezel screws should be genuine.

But you probably need a good swiss grade screwdriver and some patience and skills to remove the screws.

Cheers