New patek philippe nautilus from ppf

[molivio]

Any thoughts on the ppf v2 new blue out?

 

[Scottymagic]

Enquired about getting new Dial/hands to transplant into a PF case - then I’ll be finished and happy with my 5711 reps. If I need to buy the whole watch then do be it!

 

[stanevo6]

Scottymagic hahahaha. You have a lot of experience now with modding PP's. The day is very near now for the perfect 5711 rep indeed. My finger is on the trigger for the PPF v2.

Oh and your RM is still running perfect. runs for over a year now.

Cheers Stan

 

[mottykytu]

Enquired about getting new Dial/hands to transplant into a PF case - then I’ll be finished and happy with my 5711 reps. If I need to buy the whole watch then do be it!

no one can source a PPF 5711 dial (both white/blue) up until now as far as I know !

seem like PPF do not want to sell the dial seperately and just do this project one and only time like glaude said...

 

[molivio]

No one commented on the new blue ppf v2???

 

[mottykytu]

https://puretimewatch.io/nautilus-5...ed-dial-on-ss-bracelet-324cs-free-box-v2.html

it is different from the previous above photo of 5711 ver 2 from wechat where the Thick bezel has been already fix and look spot on!

the bezel on v2 puretime still Thick just the Dial are update...

 

[molivio]

The main question is the blue...... All that matters really and main reason why they probably releases a v2 so quickly

 

[Richidh]

That’s the grey one, right?

yes i think it is

 

[Richidh]

are you sure it is a PPF V2 or the PF V2?

since the bezel look like to be spot on!

I doubt they release the PPF V2 that soon...

and also the dial colour is hard to see !

yes iam sure it is its ppf v2

 

[Mr.Marbella]

You're likely right. Agreed about everything else. The issue is the cost. You're looking at spending close to $1,500 for the mixing and matching to acquire the ideal rep. Then, a few months later, a new version is released addressing the issue

That’s not entirely right. I have bought a ppf and a pf.

Did the hybrid mod and sold the ppf base watch with the pf dial & hands within 2 hours - 410€.

So the total cost was maybe 500€ ( + - 50-100€ I cant remember ).

I don’t think ppf will change the bezel & crown issue anytime soon.. And Even if they do there will be a new issue - thicker case, bad dial etc.

If you wait for the factory to bring out the perfect 5711 rep you might aswell start saving for the Gen.



Gesendet von iPhone mit Tapatalk Pro

 

[XLR8R]

That’s not entirely right. I have bought a ppf and a pf.

Did the hybrid mod and sold the ppf base watch with the pf dial & hands within 2 hours - 410€.

So the total cost was maybe 500€ ( + - 50-100€ I cant remember ).

I don’t think ppf will change the bezel & crown issue anytime soon.. And Even if they do there will be a new issue - thicker case, bad dial etc.

If you wait for the factory to bring out the perfect 5711 rep you might aswell start saving for the Gen.



Gesendet von iPhone mit Tapatalk Pro

i would like to know that pf bezel and crystal can be installed on the ppf?

 

[Keylog74]

i would like to know that pf bezel and crystal can be installed on the ppf?

---

No

 

[Akra]

Has anybody even tried fixing the crown? Perhaps shortening it with a lathe?
I believe the thickness of the bezel is because they haven't got the chamfer-angle correct(?) Which on itself shouldn't be that difficult of a fix for the factories either.

Atleast PPF is making steps in the right direction.

 

[XLR8R]

No

ty

 

[RM027 Lover]

Has anybody even tried fixing the crown? Perhaps shortening it with a lathe?
I believe the thickness of the bezel is because they haven't got the chamfer-angle correct(?) Which on itself shouldn't be that difficult of a fix for the factories either.

Atleast PPF is making steps in the right direction.

Yes, that's indeed the issue. Problem is, the bezel is quite a biggie

 

[nobigdeal2010]

Has anybody even tried fixing the crown? Perhaps shortening it with a lathe?
I believe the thickness of the bezel is because they haven't got the chamfer-angle correct(?) Which on itself shouldn't be that difficult of a fix for the factories either.

Atleast PPF is making steps in the right direction.

My ppf has a modified smaller crown. The crown was shortened with a lathe. It can be done

 

[Cheeps]

Yes, that's indeed the issue. Problem is, the bezel is quite a biggie

Maybe I’m incorrect, but isn’t the bezel like 2 mm thicker than it’s supposed to be?

 

[Akra]

My ppf has a modified smaller crown. The crown was shortened with a lathe. It can be done

That's good to hear. Can you show it?

 

[RM027 Lover]

Maybe I’m incorrect, but isn’t the bezel like 2 mm thicker than it’s supposed to be?

It's thick. I just mean it's a big deal for me

 

[Keylog74]

I'm out of this thread. It has become useless, full of lazy people asking the same questions over which most of them myself have answered more than once. Its not constructive anymore.