NEW Ceramic GMT-2 from Noobfactory

[zocker4711]

Nice One Lartamia

I Build the Same atm
Domi didn't know RLX good
We had Long Discussion about RLX hehe

Domi did Great Work, but as i Said he didn't know RLX good.
He Build the Watches so as Custom say's

So that means that you have give him an Noob GMT V2 and an Gen Crystal
At your Pics i see that Domi has Build in the wrong Crystal Gasket.

So you have an 2,7 Gasket on your Watch but you Need the 2,5 Gasket

if you use the 2,7 the Crystal is to High

Your Hight Looks Same as Standart Noob and that's too high too.

but anyway that are Marginal things so nice Franken Wear it well

 

[zocker4711]

And another Tip
Use the DWO V3 from TC because the other DWO's are Not soooo good Centered you see it on your 9 it is too much right.
I Hope some Modder or Watch Factory will make in Future some nice DWOs for the Asia Clone Movements.
The V3 isn't 100% at all Dates...
But you can't do anything because it's the Print on the DWO :-/

 

[Lartamia]

Thanks D. for the tip

I will fix that in the near future!

 

[Timewellspent]

I have the V2. It's on my wrist right now and I got it in Sept 2008. Here's one thing about the insert that is interesting. The V2 uses a platinum grey paint that has a refractive quality to it in sunlight. When you look at it up close you can see sparkles and a rainbow effect. I have read that the V3 and later switched to a white paint. Even though the V2 has insert numbers that are too thin, the color is better. It's not like a gen insert, nothing is ever going to come close, but it's better than white!

I also have the V2 and the thin insert one of a few flaws that drive me crazy it wanted to know if the V3 would be able to fit In the V2?

Is the color of the v3 that much different from gen?

 

[poitevinm]

Need some help with quality control, the cyclops does not look centred on the date, I am new at this and may be wrong but I think I should ask for another watch opinions?

thank you

 

[beefjerky456]

Need some help with quality control, the cyclops does not look centred on the date, I am new at this and may be wrong but I think I should ask for another watch opinions?

thank you

The photo is taken from slightly to the left of centre and is exaggerated because of how close to the watch the photo was taken - you can see this because the rehaut is showing different angles each side. It looks good to me :thumbsup:

 

[poitevinm]

what about in this image?

 

[beefjerky456]

what about in this image?

Hi, does this photo also look to you like it has been taken left of centre? If the answer is yes, my original point stands.

This is my last reply. It looks OK to me. I would accept it

 

[poitevinm]

Thank you! I will accept it

 

[heero]

Thank you! I will accept it

Good choice. Your DWO looks perfectly centered - better than some of the others I've seen.

 

[sooty19781]

Whats the difference between these? Is it just the movement? http://puretime-asia.com/product/gmt-master-ii-116710-ln-black-ceramic-11-noob-best-edition-a2836/
http://www.intime.co/product.php?id_product=1407

 

[eisnerracing]

movement on is 3186 other is 2836 i can see off the bat

 

[eisnerracing]

POST pics when you get it - cause i want this watch as well for puretime 2836

 

[electric]

Id like to see some recent feedback on this rep, it seems like it doesn't need a v2/3/4 and that if it did it would just be the "GMT master II" print that needs improved. The depth of the ceramic numerals seems deep enough, but the white paint is caked inside. My guess is if you removed all the white paint and did a careful pppp mod you would see depth.

 

[Andy5productions]

V2 supposedly... I am just trying to figure out if it takes gen parts as I can get a bezel assembly with insert

Only the BP GMT II latest model has the case that can accept gen bezel with a gen gasket the rep gasket will not work. How do I know..I am doing this mod to my BP GMT II.

 

[Rudy40]

There isn't no woke on that rehualt ?
Looks good!
I believe you got a good base watch for a Franken !



Sent from my Rolex thinking brain!

 

[zocker4711]

Only the BP GMT II latest model has the case that can accept gen bezel with a gen gasket the rep gasket will not work. How do I know..I am doing this mod to my BP GMT II.

The Noob GMT v2 Acceppt Gen Parts without any prob here an Pic of my Franken...



It has Gen Complete Bezel, Gen Crystal (incl gen gasket), Gen Dial, Gen Crown...

The same you can add on an BP Case...

 

[zocker4711]

Whats the difference between these? Is it just the movement? http://puretime-asia.com/product/gmt-master-ii-116710-ln-black-ceramic-11-noob-best-edition-a2836/
http://www.intime.co/product.php?id_product=1407

No different on these Watches only the Decorated Movement... The Watch has an Closed Caseback so why you need an Decorated Movement?
The Movement doesn´t look Gen.
Safe the $$$ and grab an A2836

But Ryan (InTime) has it also with an A2836

 

[electric]

Anyone get one of these recently

 

[hautehorloge]

Mine is in QC process. Gen complete bezel is already here and waiting for the watch.