New 5712 rep?

[grillbrill]

Because this one is the one that is not with clone movement I think

I think the gen is the same.

 

[pip72]

Yes this is version one with the decorated Solas Movement

 

[majwilliams0308]

I've just rejected the ZF v2 clone movement QC I ordered. Beat error was 6.3ms on a full wind. Also, the date would not advance via manual pressing of the pusher.

I also got QC pics for the SW Factory dial, but the TD stated he will try to exchange with the factory due to dots being missing at 5 and 7. He was reluctant to even share these, but just wanted to give me an update.

 

[pip72]

Has any modder figured out how to thin the case on the V1?

 

[grillbrill]

Has any modder figured out how to thin the case on the V1?

Some modders might be able to reduce it down to 9.2 mm but in my case it is 9.5 mm.

 

[pip72]

.3 mm is not worth the 100.00 or so.

 

[jm_brc_7057]

I also got QC pics for the SW Factory dial, but the TD stated he will try to exchange with the factory due to dots being missing at 5 and 7. He was reluctant to even share these, but just wanted to give me an update.

I ordered my sw dial from hkrwatch (wechat). He told me that all of the current batch sw dials have that missing dots at 25 and 35, and the excess dots in the seconds subdial and under the 12 markers.

He told me to wait for the release of an updated sw dial or a buff version. He expects them to be released after the current covid lockdown.

 

[Kosher]

I ordered my sw dial from hkrwatch (wechat). He told me that all of the current batch sw dials have that missing dots at 25 and 35, and the excess dots in the seconds subdial and under the 12 markers.

He told me to wait for the release of an updated sw dial or a buff version. He expects them to be released after the current covid lockdown.

Got the contact?

 

[jm_brc_7057]

Got the contact?

As stated in the contact. HKRwatch on WeChat. Please be aware. He is NOT a TD on this forum. The forum rules and regulations don’t apply to a non-TD. If you proceed, it’s on your own risk.

Although my personal experience with him so far has been good.

 

[Kosher]

So i got some feedback from my TD about what caused the change at the engraving:

¨Actually, that's because many customers complained that the font engraving was too thick. So the factory changed to laser engraving which is not cheap printing so the font is not so thick.¨

I believe that laser engraving looks nothing near gen engraving

 

[bru8131]

Has any have ordered the grey version dial of this 5712 with stainless bracelet, it is listed on many TD websites as "5712G" from GRF.