My Pam 250

[xav06]

Now we are getting somewhere....

Marlin is correct, it's a rep , a highly modified noob N version.

Here are the mods done:

- refinished dial, gen hour and minute hand, seconds hand is noob.
- hour hand and minute hand are OEM Panerai. The sec hand is NOOB.
- Setting wheels and winding pinion are OEM
- Ratchet wheels are OEM. Not just swiss but genuine OEM panerai
- the screws in the ratchet wheels are also OEM Panerai
- Click spring is OEM. as is the whole assembly of the click spring and screws
- Mainspring is OEM
- ALL 3 of the seting levers and spring are all OEM
- Hour wheel is OEM minute wheel is noob it must be to fit the plate but it was polished to look OEM
- Incabloc Cap is Y shaped to match the OEM
- the screws that hold the movement in the case are changed to match the OEM.
- Sides of the bridges were polished to look like the gen
- Crown Guard scews were changed to OEM.
- Stem is Swiss as the finish is a little different.

Currently the movement is being serviced and modified to get rid of some other minute details, like the slight difference in the swan neck regulator. It will be very very close to gen when it is finised....

 

[xav06]

About the 250, here's a closeup of the dial when the movement was serviced.

 

[xav06]

The 250:

- Eddie Lee old style case, the one with the high bezel and the correct CB engravings.
- movement: ETA 7753 with a rep panerai rotor, serviced 3 months ago.
- T-crown
- CG flush to the case with polished and flattened CG pin (opens and closes like the gen)
- genuine dial and all of the hands. all of them.
- Lello Datewheel (the black and print doesn't get better than this)
- Double colourless AR (against the rules but i like it better that way