• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

::: Montauk Highway Strap Size :::

robsons

Horology Curious
12/12/10
5
0
0
Gentlemen!

I would kindly ask you to do me a favour!

I am here in Thailand for vacation and found some leather craftsman who could make the APROO Montauk Highway strap for me.

I left my watch at home and do not have the strap measurements with me now.

Could somebody please point me to a link or even send me a sketch or detailed description to help me out! That would be very kind of you Repgeeks.

Best regards from Thailand, Robert!

P.S.: The APROO Diver has the same strap size but comes with buckle! The diver strap sizes would also help a lot.
 

SMP_lover

Strap mastermind
Vendor (Strap Maker)
13/12/10
3,614
672
113
28 at the lugs 18 at the clasp, the lenghts 120 / 70

diver is 28 at the lugs 24 at the clasp
 

robsons

Horology Curious
12/12/10
5
0
0
Thank you, SMP-Lover! This helps a lot!

Can you please provide sizes for lug-cutouts and thickness on lug-side.

Could be like: x-mm from side, cut y-mm down, z-mm right. Thickness x-mm!

Thank you very much!
 

ALE7575

Section Mod
Section Moderator
Certified
18/1/11
19,827
343
83
Hi robsons

I hope you will get all dimensions you need.

Anyway, I think it could be difficult to get them and make well the strap with only a draw. The strap adaptation in the lugs supports of an AP is very delicate. I don't recommend it to you.
You could get a sample from some watch there in Thailand.
Or some cheap wacth or strap.
You will need only one strap, because I think both straps are the same in the lugs part. Consult this in the forum.

But you will need also the length of each part depending on your wrist size.
Here you have the table to choose the appropriate lengths of each part of the strap:

135/90mm fits wrists 21 to 22cm
130/85mm fits wrists 20 to 21cm
125/80mm fits wrists 19 to 20cm
120/75mm fits wrists 18 to 19cm
115/70mm fits wrists 17 to 18cm
110/65mm fits wrists 16 to 17cm
105/60mm fits wrists 15 to 16cm

ALE
 

SMP_lover

Strap mastermind
Vendor (Strap Maker)
13/12/10
3,614
672
113
Hi robsons

I hope you will get all dimensions you need.

Anyway, I think it could be difficult to get them and make well the strap with only a draw. The strap adaptation in the lugs supports of an AP is very delicate. I don't recommend it to you.
You could get a sample from some watch there in Thailand.
Or some cheap wacth or strap.
You will need only one strap, because I think both straps are the same in the lugs part. Consult this in the forum.

But you will need also the length of each part depending on your wrist size.
Here you have the table to choose the appropriate lengths of each part of the strap:

135/90mm fits wrists 21 to 22cm
130/85mm fits wrists 20 to 21cm
125/80mm fits wrists 19 to 20cm
120/75mm fits wrists 18 to 19cm
115/70mm fits wrists 17 to 18cm
110/65mm fits wrists 16 to 17cm
105/60mm fits wrists 15 to 16cm

ALE


Yeap + 1 , i would strongly advise to get a watch case to try the strap on, otherwise you risk getting a rather useless strap (and not cheap me thinks)
 

ALE7575

Section Mod
Section Moderator
Certified
18/1/11
19,827
343
83
Yeap + 1 , i would strongly advise to get a watch case to try the strap on, otherwise you risk getting a rather useless strap (and not cheap me thinks)
+1 too OK