• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Hytrel Ring for 116610LN - Dimensions

P

pane123

Getting To Know The Place
22/8/20
34
4
8
Hey,

Does anyone happen to know the dimensions of a gen hytrel ring for a Date Submariner 116610LN?

I know the VSF takes gen and I'm trying to get an aftermarket one, rather than paying £100 for 2 rings.

AliExpress sells loads but I'd need to know the diameter, height and perimeter (I think).

If anyone has an AliExpress link to what I need I will love you forever. There are a couple at $20 but that's a bit expensive without being 100% certain it will fit.

Thanks in advance.
 
  • Like
Reactions: keisuke_z
P

pane123

Getting To Know The Place
22/8/20
34
4
8
jkrw247 said:
subscribed
Click to expand...

I contacted the seller and these should be available tomorrow at $12:

US $18.60 | Gasket For Rolex Submariner GMT Bezel Waterproof O Ring Rubber, Watch Parts
https://a.aliexpress.com/_mO27Xk3

I've also ordered these, so I'll let you know if they work:

Let's shop together on AliExpress with new user coupons
Your US $5.00 in coupons are here!
https://a.aliexpress.com/_mq0DWLV

I can't get rid of that promo link but hopefully it takes you to the product. If not, let me know.
 
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
35,565
70,858
113
I've used fishline as a replacement part several times. Its OK for there to be a break in the perimeter. It's a trial and error thing to find the correct diameter - between .50mm and .65mm is a good place to start.

ZFVuSi.jpg
 
  • Like
Reactions: 5digit4ever, pompompurin and up2wind
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
35,565
70,858
113
"It's OK for there to be a break in the perimeter"

You can also cut away part of an actual hytrel ring if it's crushed or mangled.
 
up2wind

up2wind

Active Member
Certified
9/6/19
335
80
28
What a genius, fucking fishing line!
Never thought of that. Will try it out. Thanks a lot
 
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
35,565
70,858
113
If trying fishline, start with a small diameter line and work up incrementally til an acceptable fit and function are achieved. It's possible to press a bezel with fishline in it that is too big in diameter to allow for bezel rotation. If that happens the bezel can be very difficult to remove (sometimes not possible). There is a workaround if this should happen but the repair will go much more smoothly if you don't get into this situation.
 
hm11esh

hm11esh

Active Member
4/9/18
422
105
43
P

pane123

Getting To Know The Place
22/8/20
34
4
8
tokar112 said:
https://forum.replica-watch.info/fo...as/10064127-clean-factory-zzf-v4-clicks/page3

I also need this ring for 126610 vsf. I thought I found a solution, see the link. But the guy who makes these rings hasn't been in touch for 9 days after I transferred him $60. I'm looking for alternative options. I will follow this post, please let me know if you find a solution.
Click to expand...

I've got 5 gen spec rings arriving but they will take a while to arrive because I'm in the UK. Gen is supposed to fit VSF. Mine is 116610LN so if it fits that it should fit yours.

I'll let you know if it works:


https://www.ebay.co.uk/itm/5-WATCH-...2349624.m46890.l49286&mkrid=711-127632-2357-0
 
K

keisuke_z

Renowned Member
22/1/13
505
303
63
Apologies for bringing this old thread back up - I’ve got a VSF 116610 whose bezel is not playing nice. After some investigation I found that the lip on the retaining ring is pretty high compared to a Clean retaining ring, and from the other threads I’ve read, it looks like the VSF doesn’t take a gen/aftermarket replacement hytrel ring? In which case, if I need to replace the current ring, which appears a little mangled, then the fishing line is the best option available?
 
  • Like
Reactions: Liam F
derjenigewelcher

derjenigewelcher

Watch enthusiast
Supporter
Patron
Certified
22/11/20
8,989
11,669
113
Switzerland
keisuke_z said:
Apologies for bringing this old thread back up - I’ve got a VSF 116610 whose bezel is not playing nice. After some investigation I found that the lip on the retaining ring is pretty high compared to a Clean retaining ring, and from the other threads I’ve read, it looks like the VSF doesn’t take a gen/aftermarket replacement hytrel ring? In which case, if I need to replace the current ring, which appears a little mangled, then the fishing line is the best option available?
Click to expand...


https://de.aliexpress.com/item/1005...1;17.56;-1;-1@salePrice;CHF;search-mainSearch
 
  • Like
Reactions: keisuke_z
P

pane123

Getting To Know The Place
22/8/20
34
4
8
keisuke_z said:
Apologies for bringing this old thread back up - I’ve got a VSF 116610 whose bezel is not playing nice. After some investigation I found that the lip on the retaining ring is pretty high compared to a Clean retaining ring, and from the other threads I’ve read, it looks like the VSF doesn’t take a gen/aftermarket replacement hytrel ring? In which case, if I need to replace the current ring, which appears a little mangled, then the fishing line is the best option available?
Click to expand...

You can get 5 on ebay for not very much. It was unbelievable how easily it went in and it's holding strong:

tps://www.ebay.co.uk/itm/5-WATCH-BEZEL-GASKET-FIT-BETWEEN-CASE-FOR-ROLEX-SUBMARINER-CERAMIC-116613-116610-/161620824457?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
 
You must log in or register to reply here.
Top Bottom