I lost a bezel screw also and I actually ordered screws and the screw driver but nothing works. The screw is made incorrectly- while one of the tips is thin enough to fit the screw opening (perhaps a bit too thin and I suspect some potential damage) the other tip is too thick and will not fit the screw opening. In other words, the blade is not fully inserted into the notch of the h screw head. I emailed he seller and I am hoping he’ll send me another screw driver I can actually use. Also, because I cannot unscrew any of the other screws on the bezel with this screw driver, I am unable to compare the screws that came stock with the watch with the screws I ordered. The screws I ordered fit the opening perfectly but seem to be too short. Maybe they are for the strap clasp? Or maybe they aren’t supposed to be screwed on in the first place and instead glued on? Do you (or anyone for that matter) happen to know if the bezel screws are glued on or actually functional and screwed onto the watch?? I tightened up all other screws on the watch that aren’t h screws for safety measure, and I’m glad I did as they were all pretty loose! I tried searching but didn’t find the answer regarding whether the bezel screws are screwed on or glued. Here are some pictures. Thanks in advance.