How or where to service a watch

[Redturboboy]

Searching doesn’t give me any good threads on the subject. Unless I missed them.

But looking for DIY servicing or someone trusted to keep my watches running well for a long time.

I have a few really nice Rolex reps and want to keep them from becoming paper weights. Not sure if I should just open the back and lube the movement or it’s more involved. I never did anything since receiving them.

Anyone have links to DIY methods or can put me in contact with someone (USA) that can help out. Thanks!

 

[Grapeshot]

I wouldn’t try to ‘lube’ the movement as you will almost certainly over-oil it. Find a rep friendly watch smith if you can to get them serviced properly. However if they are running without problems then keep them wound and leave them alone; it’s probably the best thing for longevity.

 

[Redturboboy]

I wouldn’t try to ‘lube’ the movement as you will almost certainly over-oil it. Find a rep friendly watch smith if you can to get them serviced properly. However if they are running without problems then keep them wound and leave them alone; it’s probably the best thing for longevity.

Thank you. My sub 116610LN had a weird internal vibration when I shook my wrist. Never felt that before so was a bit worried something wasn’t winding properly. It’s keeping time. Just got me thinking.

 

[p0pperini]

My sub 116610LN had a weird internal vibration when I shook my wrist.

It's possible that the rotor is a little loose and there's a bit of play in the rotation.

As Grapeshot says, it's not something to get into lightly. Doing anything to a movement requires the right tools for the job and good magnification. If you can't find anything on the forum, then a general Google search for "servicing a 3135" will have plenty of results including YouTube videos, which will give you some idea of what's in store if you want to try a DIY investigation.

I really recommend Mark's videos on the Watch Repair Channel. Here's his series on servicing a 3135:

 

[John]

You can find a lot of useful information on mods, maintenance & repair here:

Modification & Repairs

Forum for all general modification and repair questions.

forum.replica-watch.info

There is also a section for trusted watchmakers that you can contact for servicing requests:

Watchmakers and Horologists

Get in touch with a pro

forum.replica-watch.info

 

[ChungusThe3rd]

My opinion is a independent watchmaker. Talk to him, maybe bring in one or two watches before, get them cleaned, polished or serviced and engage in conversation. After some time ask him about servicing your rep and for me this worked just fine.

 

[MontreDeLune]

Go to an independent watchmaker

 

[derjenigewelcher]

Searching doesn’t give me any good threads on the subject. Unless I missed them.

But looking for DIY servicing or someone trusted to keep my watches running well for a long time.

I have a few really nice Rolex reps and want to keep them from becoming paper weights. Not sure if I should just open the back and lube the movement or it’s more involved. I never did anything since receiving them.

Anyone have links to DIY methods or can put me in contact with someone (USA) that can help out. Thanks!

Dear Member.

You can check our Trusted Watchmaker section, there are some guys in the states:

Watchmakers and Horologists

Get in touch with a pro

forum.replica-watch.info

 

[Kissezenet]

I get the struggle of wanting to keep your watches in top shape. It's like wanting to maintain the engine of a classic car, right? I remember when I was in a similar situation with a watch I cherished.

 

[Kissezenet]

I get the struggle of wanting to keep your watches in top shape. It's like wanting to maintain the engine of a classic car, right? I remember when I was in a similar situation with a watch I cherished.

I stumbled upon this site <MOD EDIT LINK REMOVED > , and it was like finding a goldmine of information and replicas.

While I can't vouch for DIY methods, reaching out to someone trusted for servicing sounds like a smart move. I once connected with a watch enthusiast in the USA through a forum, and they were a lifesaver when it came to keeping my timepieces ticking perfectly.

 

[P..DR..D]

I stumbled upon this site <MOD EDIT LINK REMOVED > , and it was like finding a goldmine of information and replicas.

While I can't vouch for DIY methods, reaching out to someone trusted for servicing sounds like a smart move. I once connected with a watch enthusiast in the USA through a forum, and they were a lifesaver when it came to keeping my timepieces ticking perfectly.

We have our own trusted watchmakers - no further shilling with off site links please