• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Gen Daytona vs Noob V1-V2 and V2.2 Daytona vs ARF V2 Daytona

OldNavitimer

I'm Pretty Popular
Supporter
Certified
22/1/19
1,419
1,766
113
Here are are my three, plus a gen gold for comparison:

IMG_4596_zpsri9exonx.jpg


B5F5B58D-094E-43BF-A86F-64A7DF275441_zpsnxv0ix4c.jpeg


C3614F23-C2D4-4A47-8185-05BC9A310A36_zpstibzvlxw.jpeg


D29D1B90-2B5B-4530-B84E-2F3A8732FE14_zpsfwecic12.jpeg
 

HotNHorny

Known Member
21/7/19
129
16
0
Pop your bezel off (116500) and align it, looks like the guy who installed it turned up to work drunk :) . Can you post more pictures of the 116519

Both of them actually looks like it’s misaligned. Opposite directions ????


Sent from my iPhone using Tapatalk
 

sorry

Do not accept unsolicited offers
18/8/19
1
0
0
Thanks for the great information. I have ordered a 116500 panda from Noob.
 

karter01

Do not accept unsolicited offers
15/7/19
7
1
3
Is it worth doing the Molotow paint mod to the noob V2’s or is the bezel color close/bright enough to gen?
 

haggle_

Known Member
29/6/18
102
6
0
No mods required but it isn’t as forgiving as a steel bezel, so be careful otherwise you’ll snap it

1) Where do I buy an extra arf bezel?
2) Are there any instructions on how to replace the bezel?
 

2841

Daytona Hoarder
Certified
6/6/19
2,025
1,933
113
USA
I'm doing a bit of work on my 116500 White Noob v2.2.

I got the new Clean factory bezel on the way, and i was thinking about switching out the bracelet for the ARF. And here it gets a bit tricky for me.... i've read a lot of treads on people both having bad luck with SEL fits, and people having no problems at all. My stock endlinks are perfect on 6 side, but has a tiny gap on 12 side.

So.... Let me hear from the people who swapped the bracelet. Is there really a big difference in quality on the actual bracelet? Mine feels smooth after a cleaning and spa treatment, but does appear a bit sharp on the edges. And what are your experiences with the SEL

Trying hard to figure out if i should get the whole ARF bracelet or just the clasp.
 

M Scott

Renowned Member
22/9/18
857
1,163
93
1) Where do I buy an extra arf bezel?
2) Are there any instructions on how to replace the bezel?

You can not buy an extra ARF bezel as ARF stopped selling individual bezels months ago.
 

M Scott

Renowned Member
22/9/18
857
1,163
93
I'm doing a bit of work on my 116500 White Noob v2.2.


Trying hard to figure out if i should get the whole ARF bracelet or just the clasp.

ARF and Noob endlinks do not fit each other very well, if at all. That's why people just replace the clasp.
 

HotNHorny

Known Member
21/7/19
129
16
0
ARF and Noob endlinks do not fit each other very well, if at all. That's why people just replace the clasp.

I thought people replace the NOOB SEL with ARF one and it is interchangeable


Sent from my iPhone using Tapatalk
 

Kaloc

Renowned Member
Certified
18/7/18
646
167
43
I thought people replace the NOOB SEL with ARF one and it is interchangeable


Sent from my iPhone using Tapatalk

You can but it requires a bracelet puller, a tool which is not cheap..
 

HotNHorny

Known Member
21/7/19
129
16
0
You can but it requires a bracelet puller, a tool which is not cheap..

Wait what? It’s not a simple change as if you were changing the bracelet? I’m confused now


Sent from my iPhone using Tapatalk
 

HotNHorny

Known Member
21/7/19
129
16
0
You can but it requires a bracelet puller, a tool which is not cheap..

I saw someone disassembly the SEL from the body of a genuine Daytona so he could polish it. He did use what seems to be a very very simple too to pull the springs down so he could remove the SEL. It seems like a needle can even do the job or some sort of pin.


Sent from my iPhone using Tapatalk
 

2841

Daytona Hoarder
Certified
6/6/19
2,025
1,933
113
USA
I saw someone disassembly the SEL from the body of a genuine Daytona so he could polish it. He did use what seems to be a very very simple too to pull the springs down so he could remove the SEL. It seems like a needle can even do the job or some sort of pin.


Sent from my iPhone using Tapatalk

You are talking about taking the bracelet off with a Spring Bar tool, this has nothing to do with changing SEL on a bracelet
 

HotNHorny

Known Member
21/7/19
129
16
0
You are talking about taking the bracelet off with a Spring Bar tool, this has nothing to do with changing SEL on a bracelet

Confused now. I thought the SEL is the last part/link of the bracelet that attaches directly to the watch which can easily be removed using pins and compressing the springs.


Sent from my iPhone using Tapatalk
 

ginopino

I'm Pretty Popular
7/11/16
2,984
410
83
Confused now. I thought the SEL is the last part/link of the bracelet that attaches directly to the watch which can easily be removed using pins and compressing the springs.


Sent from my iPhone using Tapatalk

Yes, on the watch side. But the problem with ARF bracelet seems to be that the SEL on it is not fitting well on noob case.
some people, as you said, swapped the SEL from Arf bracelet with the one from noob bracelet. But is a huge work because the SEL (sold end link) is the last part of the bracelet and need a special tool to separate it from the rest of the bracelet.
 
Last edited:

2841

Daytona Hoarder
Certified
6/6/19
2,025
1,933
113
USA
ARF and Noob endlinks do not fit each other very well, if at all. That's why people just replace the clasp.

What’s your take on the quality difference between the two?
 

HotNHorny

Known Member
21/7/19
129
16
0
Did you try just switching the entire bracelet between ARF and NOOB bracelet? All the way from where it connects to the watch body?


Sent from my iPhone using Tapatalk
 

freediver

I'm Pretty Popular
24/3/17
2,772
1,389
113
Did you try just switching the entire bracelet between ARF and NOOB bracelet? All the way from where it connects to the watch body?


Sent from my iPhone using Tapatalk

Sel's are the problem, swapping all links + clasp except sel's is very easy