• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Franken 116710LN Build w/ SH3185 Hybrid

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,559
113
he might have thought this was my sales thread for this watch. either way, like you said, not too bad

if this happens in a sales thread , please let me know , ;)
 

RWIuser88

Banned member, the goat does not approve
Banned
14/3/18
187
20
0

You mean like your post #56 in my sales thread:
nah it will be much more fun to get the "Help I ruined $4k worth of gen 1680 parts because I thought I could do it" thread

At any rate I'm not just going to give you the answer, but I will in good faith attempt to teach you how to learn how to find these answers yourself in the future.
First you have to understand the problem.

Please state exactly what is causing the problem that makes the crown .4mm low. At any point of this "get this" on topic constructive discussion, the solution might pop into your head and you will say "but it is so simple!" Why did I not see it before...
 

2fake4u

Respected Member
20/9/16
3,037
476
83
You mean like your post #56 in my sales thread:
nah it will be much more fun to get the "Help I ruined $4k worth of gen 1680 parts because I thought I could do it" thread

At any rate I'm not just going to give you the answer, I will attempt to teach you how to learn how to find these answers yourself in the future.
First you have to understand the problem.

Please state exactly what is causing the problem that makes the crown .4mm low. At any point of this "get this" on topic constructive discussion, the solution might pop into your head and you will say "but it is so simple!" Why did I not see it before...

man this guy is no fun...
 

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,559
113
You mean like your post #56 in my sales thread:
nah it will be much more fun to get the "Help I ruined $4k worth of gen 1680 parts because I thought I could do it" thread

At any rate I'm not just going to give you the answer, but I will in good faith attempt to teach you how to learn how to find these answers yourself in the future.
First you have to understand the problem.

Please state exactly what is causing the problem that makes the crown .4mm low. At any point of this "get this" on topic constructive discussion, the solution might pop into your head and you will say "but it is so simple!" Why did I not see it before...

Are you trying to get under my skin ? cause if you are , you are doing a pretty good job right now
 

2fake4u

Respected Member
20/9/16
3,037
476
83
Are you trying to get under my skin ? cause if you are , you are doing a pretty good job right now

He is not just going to give you the answer, but he will in good faith attempt to teach you how to learn how to find these answers yourself in the future.
First you have to understand the problem.

... this is what happens when i have no work to do, but still go to the office for the day to avoid the wife and her sisters that are in town
 
  • Like
Reactions: KJ2020 and Rx4Time

2fake4u

Respected Member
20/9/16
3,037
476
83
You mean like your post #56 in my sales thread:
nah it will be much more fun to get the "Help I ruined $4k worth of gen 1680 parts because I thought I could do it" thread

At any rate I'm not just going to give you the answer, but I will in good faith attempt to teach you how to learn how to find these answers yourself in the future.
First you have to understand the problem.

Please state exactly what is causing the problem that makes the crown .4mm low. At any point of this "get this" on topic constructive discussion, the solution might pop into your head and you will say "but it is so simple!" Why did I not see it before...

plenty of things to do. filler weld the tube hole, redrill and tap lower. put a spacer between dial and case to lower the movement. bush out the tube hole to relieve any stem pressure in the tube.

Like i said, if you have a new way of doing it, share it with the community. If you think you have a new way of being douchey, we have actually seen this way before.
 

RWIuser88

Banned member, the goat does not approve
Banned
14/3/18
187
20
0
So you can dish it out but you can't take it. That is a statement, not a question.

Since you are not interested learning how to learn, I'll just leave you to it.

I'll agree stay out of your threads if you stay out of mine.

How do you like my new red ink that "my friend" added on his neat printer?
msYZSjw.jpg
 
Last edited:

RWIuser88

Banned member, the goat does not approve
Banned
14/3/18
187
20
0
Oh, and nice build. Really. You did a very very good job. I admire your skill set with this build. Sincerely. I could not have done as well myself and am not ashamed to admit it.
 

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,559
113
You mean like your post #56 in my sales thread:
.



You had better tell me what thread you are accusing me of crapping , i mean NOW
 

RWIuser88

Banned member, the goat does not approve
Banned
14/3/18
187
20
0
Not you, it was 2fake in my 1680 yodog build sales thread.
 

JackJ1980

Mythical Poster
20/6/16
6,280
350
0
Not you, it was 2fake in my 1680 yodog build sales thread.

I remember that. It’s the thread where you crapped on your own sale. That was epic. You said how shitty the watch was you were trying to sell and bash Yodog at the same time. Then claimed to be god I believe.
 
  • Like
Reactions: Longwood

RWIuser88

Banned member, the goat does not approve
Banned
14/3/18
187
20
0
I remember that. It’s the thread where you crapped on your own sale. That was epic. You said how shitty the watch was you were trying to sell and bash Yodog at the same time. Then claimed to be god I believe.

Actually, if you read the thread. My complaint was that non functioning parts were not disclosed by the seller. YoDog made it very clear he would have disclosed these flaws, but since He was not the seller, it was not his responsibility. YoDog did nothing wrong and I said so in that thread. Then people said those things could not be fixed, then I fixed them, I think this is the god you are referring to.

But I suggest you drop this line as it is polluting 2fakes thread here. I recommend leaving this thread to 2fake as it is his thread and people don't like people taking things off track, double standard I know, but true just the same.

My post in this thread was on topic and was an offer to teach how to learn how to fix these mechanical problems, but, as this is not desired. I have agreed to end the discussion.
 
Last edited:

2fake4u

Respected Member
20/9/16
3,037
476
83
Actually, if you read the thread. My complaint was that non functioning parts were not disclosed by the seller. YoDog made it very clear he would have disclosed these flaws, but since He was not the seller, it was not his responsibility. YoDog did nothing wrong and I said so in that thread. Then people said those things could not be fixed, then I fixed them, I think this is the god you are referring to.

But I suggest you drop this line as it is polluting 2fakes thread here. I recommend leaving this thread to 2fake as it is his thread and people don't like people taking things off track, double standard I know, but true just the same.

My post in this thread was on topic and was an offer to teach how to learn how to fix these mechanical problems, but, as this is not desired. I have agreed to end the discussion.

i have no issue with threads going off topic. this one has all the important info in the 1st post.

you still havent posted up this revolutionary fix for crown height though
 

silentflight

I'm Pretty Popular
Certified
14/6/13
1,334
137
63
Let me get off topic, but getting back on topic...

will a sh3186 gmt movement fit in a 3135 case?

Or or will they only fit in 2836 cases?
 

2fake4u

Respected Member
20/9/16
3,037
476
83
Let me get off topic, but getting back on topic...

will a sh3186 gmt movement fit in a 3135 case?

Or or will they only fit in 2836 cases?

should fit but stem height may be off a tad and the rotor could potentially rub on the caseback depending on which case you are using.