• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

First time order with Chazing on VSF 114060

var554

The Mothership
25/6/23
345
411
63
USA
I understand and I know it will most likely not be seen by the naked eye but I also noticed the word CERTIFIED was slanted, again no one will ever notice but it will always be in the back of my mind. Just weird From the thousands of VSF 114060s I have seen never seen them like this. My noobs dials felt cleaner tbh.

Other then that the watch looked perfect.

Thanks for the input 🙏
No one mentioned the space between the e and t in chronometer. I can't be the only one that sees it. I also can't be the only one who realizes that we are purchasing counterfeit goods from across the pond, sold illegally and with the potential to have some flaws? I'm sure the OP realizes this, yes? Maybe this is not the right hobby for the OP? JMHO
 

tripdog

Super Moderator
Staff member
Global Moderator
Certified
9/7/12
23,743
20,897
113

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
I would have GL the watch and there are my words above saying so.


Said you are aware that the VSF and gen share similar issues but in post six you had no idea that the VSF 114060 had known flaws. So what one is it?. You can't get any newer then the one in the QC pics they showed you and the other ones you were seeing posted have the same print as yours did.

If you were going to pick up your watch at an AD and started complaining about the print on the dial, the AD would kindly take the watch back and sell it to another person who would appreciate it. Then you would have zero chance of ever getting a call from that AD again for a Rolex.

You RL the watch because you thought the dial or rehaut were off center and asked for input. You received my input and then you came back asking about the printing on the dial and I showed you a pic of my VSF and a pic of a gen and let you know that both have the same flaw. I am sure @BMW760 would agree with me that reps might not be a good hobby for you.
Ok you win my friend, I wave the 🏳️

I mainly RLd this watch because of the Rehaut being off center which wasn’t a big deal but hard to swallow when a lot of my other noobs,arfs, even BPs low ends being pretty spot on) its petty I know. To be honest I could have lived with the dial because it is microscopic and would most likely find a gen dial to swap anyway.

I had a post on Reddit QC and 95% also RLd but you guys are the OGs and should have listened. This is what messed with my head. 😔

Next Qc sent to me will be GL and I won’t be a bitch I promise 😆
 

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
This is what a Swiss made Rolex looks like - full of errors. You'd have to be crazy spend all that money on a Swiss Rolex when the Chinese Rolex have exactly the same errors.

Thank you @tripdog I know I look like a complete idiot and blew this thread out of proportion. You have confirmed it sir.

Sorry to everyone who commented in here, I know I look foolish complaining about it. And I do apologize to everyone and Alice.
 
  • Like
Reactions: tripdog

asusundevils1971

Your Parents Warned You To Stay Away From Me.
Supporter
Top Poster Of Month
23/2/23
16,907
28,028
113
Canada
Ok you win my friend, I wave the 🏳️

I mainly RLd this watch because of the Rehaut being off center which wasn’t a big deal but hard to swallow when a lot of my other noobs,arfs, even BPs low ends being pretty spot on) its petty I know. To be honest I could have lived with the dial because it is microscopic and would most likely find a gen dial to swap anyway.

I had a post on Reddit QC and 95% also RLd but you guys are the OGs and should have listened. This is what messed with my head. 😔

Next Qc sent to me will be GL and I won’t be a bitch I promise 😆
This wasn't about winning, my posts were to help you first with your rehaut and then with the dial concerns. The dial printing mentioned and with pictures by me and tripdog show that Rolex is full of errors too. So even if you buy a gen dial for the VSF it will still have the errors. You can skip Reddit for QC concerns if 95& said to RL that beauty. And just remember on your next QC pics that when you magnify them 100X they will show errors that you would never notice by looking from a distance of four inches with your eyes.
 
  • Like
Reactions: RiteOnTime

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
This wasn't about winning, my posts were to help you first with your rehaut and then with the dial concerns. The dial printing mentioned and with pictures by me and tripdog show that Rolex is full of errors too. So even if you buy a gen dial for the VSF it will still have the errors. You can skip Reddit for QC concerns if 95& said to RL that beauty. And just remember on your next QC pics that when you magnify them 100X they will show errors that you would never notice by looking from a distance of four inches with your eyes.
You are 100% right, I really appreciate your insight man and everyone else as well. Sorry for sounding like such an idiot and making my self look dumb. I’m literally complaint about stupid things on a $500 watch that is actually pretty damn good looking. 😔 I overreacted a bit.
 

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
Update: I have decided to GL this watch after everything. Thanks for everyone’s inputs. I was being to picky for no reason.

Excited to get it 🙌🏼 will keep everyone updated when it arrives
 
  • Like
Reactions: Caboose

Superkenz46

Getting To Know The Place
31/7/21
23
4
3
hello everyone, I take advantage of our friend's main post to ask for advice on my hont qc photos. the dial looks good to me, even the rehaut is not exactly aligned in all points but it's fine. someone who is more attentive notices other very evident defects. it's a 14060 vsf
 

Superkenz46

Getting To Know The Place
31/7/21
23
4
3
even the dial does not seem completely aligned, but I do not understand if it is the perspective
 

asusundevils1971

Your Parents Warned You To Stay Away From Me.
Supporter
Top Poster Of Month
23/2/23
16,907
28,028
113
Canada
How do you deduce that the dial is misaligned? I didn't notice
There is nothing wrong with the rehaut or the dial. Your money your choice if you want to RL or GL the watch. Read this whole thread and you will get my thoughts on the VSF 114060. @RiteOnTime maybe you can pass down the information you have received to @Superkenz46 and help him.
 
  • Like
Reactions: TESLA760

Superkenz46

Getting To Know The Place
31/7/21
23
4
3
There is nothing wrong with the rehaut or the dial. Your money your choice if you want to RL or GL the watch. Read this whole thread and you will get my thoughts on the VSF 114060. @RiteOnTime maybe you can pass down the information you have received to @Superkenz46 and help him.
Thank you for your feedback but I find that there is some problem. at this point the question I ask you is this: if it were your watch, would you accept it?
 
  • Haha
Reactions: j-unit and TESLA760

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
hello everyone, I take advantage of our friend's main post to ask for advice on my hont qc photos. the dial looks good to me, even the rehaut is not exactly aligned in all points but it's fine. someone who is more attentive notices other very evident defects. it's a 14060 vsf
I think your watch looks great. Your rehaut and dial seem on point to me. Especially the serial number! GL for me my man!

 

asusundevils1971

Your Parents Warned You To Stay Away From Me.
Supporter
Top Poster Of Month
23/2/23
16,907
28,028
113
Canada
Thank you for your feedback but I find that there is some problem. at this point the question I ask you is this: if it were your watch, would you accept it?
First two posts you are concerned about the rehaut and dial alignment and now you are concerned about the insert alignment of the bezel. The pics are magnified 100 X and when the watch is on your wrist you wouldn't notice .006mm. Again I will say that there is nothing wrong with the watch.
 

TESLA760

Time is Money $$
Patron
Certified
7/2/11
24,689
21,047
113
Socal Wine Country
Loop Working GIF by joonasjoonas
 

var554

The Mothership
25/6/23
345
411
63
USA
Thank you for your feedback but I find that there is some problem. at this point the question I ask you is this: if it were your watch, would you accept it?
I dunno dude, when I look at this watch blown up to the SIZE OF A DINNER PLATE, I can let my imagination run wild. You should RL it because the plastic wrap has some wrinkles. Also, the fuzz on the glove of the person holding it is suspect, and it appears to you, IN THE SIZE OF A DINNER PLATE, to be sub par to your personal discriminating tastes. It's simple,if you cannot accept what are VERY MINOR, YET MAGNIFIED TO THE SIZE OF A DINNER PLATE, issues, you should RL this and finad another hobby. Nothing in life is perfect, and that includes these illegal, counterfeit, replicas. You do know where you are, don't you?
 

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
8/30/23 - Order Date
9/2/23 - QC picture
9/4/23 - Gave GL
9/7/23 - Tracking number received.

Super impressed with the speed of the transaction, would have been faster if I didn’t bitch 😭

Will update when arrived in hand 🙌🏼
 

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
Hey guys so sorry for the lack of update. Super busy in the business I am in!

Watch had wrong zip code due to my error. Thankfully

Order created: 08/30
QC: 09/02
Gave the GL: 09/044
Shipped: 09/07/23
Received Watch: 09/20/2023(would have been 9/18 if zip code was correct, bounced around post offices until they figured out city)

I am overall very satisfied with Alice and the Chazingtime team. The watch looks amazing on wrist. The bracelet was very tight when opening and closing but a little oil bath for the bracelet helped immensely!

Thanks again!!

 

RiteOnTime

Known Member
Certified
10/7/18
183
48
28
The recessed lugs and shape to me is pretty spot on. In love with it!