• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

DiW daytonas, anybody got any wristshots

K

krim21

Do not accept unsolicited offers
13/5/09
13
2
3
Always thought what would come out if Rolex used exotic materials and open case backs.
​​​on a fence to go with panda Daytona or one of these (wish I could get both, but can't)
 
p0pperini

p0pperini

patr0n h0arder
Gold Patron
Certified
29/1/19
9,387
33,793
113
UK
Are you talking about reps or gen? I didn't even know what "DiW" was until about 5 minutes ago, (thanks to your post!) and the only reps I've seen in this style have been pretty crap quality.
 
A

APboyboy

Getting To Know The Place
MULTI ACCOUNT
21/3/17
54
12
8
They used to have a thickness issue due to 7750. But now OMF has managed to use 4130 which means that the thickness is the same as gen. Available on puretime now

I am saving up to buy one lol.
 
p0pperini

p0pperini

patr0n h0arder
Gold Patron
Certified
29/1/19
9,387
33,793
113
UK
Well there you go, I’ve learned about a rep range that I didn’t even know existed. I follow a lot of wristie threads and have never seen a single person post a pic of any of those OMF DiW Daytonas. Who’s buying them? I’ve seen a few cheap Artisans de Geneve copies, but this was a new brand - and a new rep range - to me!
 
pwo

pwo

Active Member
12/6/17
451
114
43
OMAN
OMG !!

Somebody pass this to OMF and WWF please.

37eb51fb05de8a19fb345fcc6b996f42.jpg


Sent from my SM-G975F using Tapatalk
 
  • Like
Reactions: ab3 and SSW09
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
34,663
66,755
113
APboyboy said:
They used to have a thickness issue due to 7750. But now OMF has managed to use 4130 which means that the thickness is the same as gen. Available on puretime now

I am saving up to buy one lol.
Click to expand...

Noob is the only factory that uses the real SA4130. They have rights to it and have not shared it with anyone else. The OMF uses an A7750 decorated to 4130 and is 14mm thick. This is in the text description of the watch. Gen is about 12.1mm.

https://puretimewatch.io/daytona-diw...rap-a4130.html
 
Last edited:
  • Like
Reactions: KushBandit and QueTip
QueTip

QueTip

Super Duper Galactic NutSwinging BootyGrabbin Mod
Staff member
Global Moderator
Certified
3/6/14
14,534
5,770
113
APboyboy said:
They used to have a thickness issue due to 7750. But now OMF has managed to use 4130 which means that the thickness is the same as gen. Available on puretime now

I am saving up to buy one lol.
Click to expand...

Yeah, no. OMF is 7750 just like all the others.
 
  • Like
Reactions: KushBandit and James2020
K

krim21

Do not accept unsolicited offers
13/5/09
13
2
3
Would the movement be a time bomb or are they quite stable these days, has been around 5 years since I bought my last rep and it's finally died on me AP diver carbon, was thinking to replace it with something long lasting
 
P

philwongnz

I'm Pretty Popular
27/1/14
1,798
660
113
krim21 said:
Would the movement be a time bomb or are they quite stable these days, has been around 5 years since I bought my last rep and it's finally died on me AP diver carbon, was thinking to replace it with something long lasting
Click to expand...
Have you the movement serviced? What type is it? A2824 can be replaced.

Sent from my SM-N976B using Tapatalk
 
K

krim21

Do not accept unsolicited offers
13/5/09
13
2
3
No what's happened is the dial has come loose and can rotate around the watch, but the movement seems to still be working fine.
i reckon it's going to cost similar money to replace the movement at the same time as fixing the dial that I might aswell just buy a new watch? I've never had to send a watch for servicing, but I reckon it'll cost maybe £200 to do and a new watch would be maybe 350£? If it's maybe 150 or less then I would do fix and service
 
P

philwongnz

I'm Pretty Popular
27/1/14
1,798
660
113
krim21 said:
No what's happened is the dial has come loose and can rotate around the watch, but the movement seems to still be working fine.
i reckon it's going to cost similar money to replace the movement at the same time as fixing the dial that I might aswell just buy a new watch? I've never had to send a watch for servicing, but I reckon it'll cost maybe £200 to do and a new watch would be maybe 350£? If it's maybe 150 or less then I would do fix and service
Click to expand...
Since is not a chrono is a bit cheaper, for example I got my 4130 service for £150 so set your bar around that.

From the sound of it, the dial feet snapped, so if you know your way around taking a watch movement out, you might just need to stick down the dial to the movement by using dial dots or simply some tape if you are on a budget. You shouldn't need to take off the hands if you can carefully wedge the tape or dot through the gap. I might be wrong but that's what I will do

Sent from my SM-N976B using Tapatalk
 
Hazing

Hazing

And So It Begins... Again
9/5/19
5,185
4,441
113
krim21 said:
No what's happened is the dial has come loose and can rotate around the watch, but the movement seems to still be working fine.
i reckon it's going to cost similar money to replace the movement at the same time as fixing the dial that I might aswell just buy a new watch? I've never had to send a watch for servicing, but I reckon it'll cost maybe £200 to do and a new watch would be maybe 350£? If it's maybe 150 or less then I would do fix and service
Click to expand...
If the movement is still working why would you call it a time bomb?

Sent from my SM-G960U using Tapatalk
 
Hazing

Hazing

And So It Begins... Again
9/5/19
5,185
4,441
113
Actually I was on the DiW website and they have some really cool designs.

0dad81343ee6afc88df804403fba7018.jpg



Some of them are not really all that cool and like downright ugly. Lol

Like this one.
1732d9b5064b16aafca97522a23e34c0.jpg



But some of them look pretty cool.
de1e0e30b80f4d9df984894934dafbbb.jpg

94224795e4a3e2d7adf4d5c0fcfdd0bc.jpg


Also. Now that I see it and think about it, I wouldn't dlbe surprised if Rolex did something hulk like with a Daytona when it's time for the next anniversary edition. This Pic made me think of that.
69a97984f305746c13fb016180cea4bf.jpg




Also, DiW does some cool stuff with GMTs too. As well as Constantine Jokers and iPhone cases.
d8a3ed1b628e4efd60fb843764432f3c.jpg

2ca5a129a61135fe405c2d7bc93d7d26.jpg

8c7a12776c97c53fd57e5211a34a26d2.jpg

563504f99bfd3862214691150ac8a524.jpg


Sent from my SM-G960U using Tapatalk
 
Last edited:
jcguo0516

jcguo0516

Active Member
4/12/18
448
289
63
KJ2020 said:
Noob is the only factory that uses the real SA4130. They have rights to it and have not shared it with anyone else. The OMF uses an A7750 decorated to 4130 and is 14mm thick. This is in the text description of the watch. Gen is about 12.1mm.

https://puretimewatch.io/daytona-diw...rap-a4130.html
Click to expand...

actually the contract from Noob with the movement factory ends this month, I think we might be expecting price drop in the daytona line up
 
Tony Clifton

Tony Clifton

Renowned Member
7/2/20
606
490
63
Germany
jcguo0516 said:
actually the contract from Noob with the movement factory ends this month, I think we might be expecting price drop in the daytona line up
Click to expand...

Are you sure about this? I really can’t imagine that Noob will let this happen as the Daytona is their best selling model. It would be an economic disaster for them. Imagine an ARF with the SA4130 clone - this would mean game over for Noob. What desirable model would they have in their lineup if they have to share the clone? With the Subs they lose to ZZF and except the Pepsi inserts their GMTs are als lower quality than ARF and VRF.
 
  • Like
Reactions: KJ2020
You must log in or register to reply here.
Top Bottom