Could this be aligned

[yoyohoneysingh]

Hey guys,

I recently received a Big Bang Black Magic v6.5. The watch is awesome but i noticed that the plates that i highlighted were not aligned. Could this be an easy fix of removing screws for the band and adjusting them?

I not so brave at disassembling watches, so wanted to run it by the forum and see if that would fix it or is there another way?

Any guidance will be greatly appreciated!!

This is how it should look

Its not a major flaw, but would like to adjust it if its an option.

Thanks!

 

[Xswapper5]

What's not aligned? I must be missing it

 

[yoyohoneysingh]

What's not aligned? I must be missing it

The Bend on the plate with 2 screws that hold the strap. Its much more forward than it should be i guess.

 

[Xswapper5]

I've had both rep and gen and never noticed that. I think it is just the different camera angles

 

[chimera87]

I think its the camera angle too...
Btw these are QC pics

Sent from my SM-G925I using Tapatalk

 

[lmmo]

Camera angles!

 

[yoyohoneysingh]

No guys, I checked in real. I dont think its the camera angle. I took some extra photos, it shows it much better.

Here is how it supposed to look

Its not a major deal, just wondering if i could adjust it myself.

 

[ZoomBoy]

It's supposed to be like that. If you're concerned buy an H driver from a TD and unscrew the plates. Push them closer to the case and screw back down.

 

[yoyohoneysingh]

It's supposed to be like that. If you're concerned buy an H driver from a TD and unscrew the plates. Push them closer to the case and screw back down.

Yes! this is what i was looking for. Thanks, i will give it a shot! i have the screwdriver already just dint know if it could be done at all hence i wanted to run it by here.

 

[ZoomBoy]

These watches are super easy to disassemble. With 2 screwdrivers you can take it completely apart. You won't have to worry about scratching anything either with the ceramic case. Good luck.

 

[crakwatch]

These watches are super easy to disassemble. With 2 screwdrivers you can take it completely apart. You won't have to worry about scratching anything either with the ceramic case. Good luck.

except the screws as they're made with cheese :wink:

 

[ZoomBoy]

except the screws as they're made with cheese :wink:

They're not that bad. Just don't be forceful with the H-driver and cover it in saran wrap if you're very nervous about scratches.

 

[trusnow]

looks good to me. my eyes must be bad

 

[Exklusive]

It's supposed to be like that. If you're concerned buy an H driver from a TD and unscrew the plates. Push them closer to the case and screw back down.

Are you referring to the top screws or sides? I may have this issue too.

 

[ZoomBoy]

Are you referring to the top screws or sides? I may have this issue too.

Side screws are just a traditional flat head design.