-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Coming soon , new CG project
- Thread starter goin6633
- Start date
Sorry guys , just too busy these days !
I need to finish works for the customers before the vocation .
I will show you guys the pics later , side by side view .
Also , compare to my Toro and LH CG .
I will say , they're good enough !
I need to finish works for the customers before the vocation .
I will show you guys the pics later , side by side view .
Also , compare to my Toro and LH CG .
I will say , they're good enough !
Here comes the pics !
First , the CGs I received , 20 CGs .
And for easy to call the new CG , I use fisrt worlds of the name of the supplier " NL" for the new CG .
I took out one of them for the pics .
And the side by side pics , left : Toro , middle : NL , right : LH .
Thickless : LH > NL > Toro
Top view , seemds like the CG pin is s little rise , but should able easy to push it down a little bit .
Side view
On case , Toro CG need to fix the screw holes , or the screw can't be install easily .
The CG is all new , so I can't screw it right away .
Toro
LH , the CG is a old one , so forgive about the damage on it .
NL
Good :
1. Lever is tight enough , just like Toro , but not that tight , no need to glue or add oring .
2. The inside is better finish than LH & Toro .
3. Fit the case better in the edge to me .
4. Thiner than LH , but not enough .
Bad :
1. The lever to push the crown is too thin , should be a little fater .
2. Not thin enough as I said .
The supplier told me the price for the members is $99 including world wild registered airmail , and $90 each if order 3+ once .
Let me know how do you guys feel !
First , the CGs I received , 20 CGs .
And for easy to call the new CG , I use fisrt worlds of the name of the supplier " NL" for the new CG .
I took out one of them for the pics .
And the side by side pics , left : Toro , middle : NL , right : LH .
Thickless : LH > NL > Toro
Top view , seemds like the CG pin is s little rise , but should able easy to push it down a little bit .
Side view
On case , Toro CG need to fix the screw holes , or the screw can't be install easily .
The CG is all new , so I can't screw it right away .
Toro
LH , the CG is a old one , so forgive about the damage on it .
NL
Good :
1. Lever is tight enough , just like Toro , but not that tight , no need to glue or add oring .
2. The inside is better finish than LH & Toro .
3. Fit the case better in the edge to me .
4. Thiner than LH , but not enough .
Bad :
1. The lever to push the crown is too thin , should be a little fater .
2. Not thin enough as I said .
The supplier told me the price for the members is $99 including world wild registered airmail , and $90 each if order 3+ once .
Let me know how do you guys feel !
Hmmm the lever needs to be a little more flush to the rest of the CG. Let's see what the guys over at WC have to say
Really? From the picture the other twos looks like got the same problem?
I just take a look on 5-6 pcs of my gens but seems like the finishing on the CG & its lever are the same and nothing more flush....
Then I'm afraid your gens are reps lol. Gen levers are PERFECTLY flush with the case. Neither are they sticking or going on
Oh.... really.... Can you help to double check on some of my toys? Thanks
127
217
232
249
358
26
233
183
219
Goin, can the pin be pushed inward to make it flat?
+1 on that, only flaw I saw. CG looks great but not to thread crap my WSO looks as nice as well. I was waiting a 1:1 Pre-V CG, maybe my hopes were too high.
I check some other CGs , most of them are good .
The pin can be pushed easily .
And I took another one for you to check , the lever is much better .
Check yourself .
WSO is the same as Toro .
The pin can be pushed easily .
And I took another one for you to check , the lever is much better .
Check yourself .
WSO is the same as Toro .
Looks much better Goin. Will you do this for us before sending it out? 
Or am I asking too much??? Hahhaha... it really saves a lot comparing with LH!
Or am I asking too much??? Hahhaha... it really saves a lot comparing with LH!
WSO is cheaper but seems like way worse than this new one, Goin bought the WSO for my friend before but it required lots of terrible modding, then the cost of workmanship pumps up the total cost.
I think they look pretty good. Obviously if the CG pin can be pushed in and goin is gonna do this for us than its basically a non issue. I believe the main issue is what goin has pointed out, the lever isnt quite thick enough. However I think its better than toro thats for sure, Im not sure its better than LH due to that lever issue however LH will charge around 200 USD for his delivered, these are half the price and I think thats pretty bloody good.
Totally agree. For the lever, what he meant is not the whole lever but just the part used to push the crown isn't that fat enough. So I think it is acceptable with this price since that part is hard to be noticed on a completed watch.
In that case even better, yeah just looked again! Im not bothered about the bit that actually pushes the crown in, like you said if the lever is closed this wont be noticable anyway. Also its sometimes easy to forget we are looking at magnified pics of what really would be quite hard to spot with normal vision. I think its great, well done goin