Since this has been asked a number of times recently, and I wanted to know too, I took my spare Clarks 295 and tried to fit it to my 36mm Exp-I. Mendota, this is for you - the Clarks 295 does fit on the 36mm Exp-I. I just installed it on mine a few minutes ago. Depending on your gasket, you may have to sand down the inner diameter of the bezel, at least at the bottom to get a start over the gasket.
The Clarks visually appears a tad wider than the stock, press-in crystal/gasket combo, in part because the crystal snaps into the gasket differently (Clarks gasket too). It looks a TON better because the Clarks has the polished edges to the crystal, where the stock one has opaque edges that a less smooth.
Before anyone asks, I don't know what height gasket I used. I had an assortment, and I was initially going to go with a tall one, but it looked like it would be TOO tall. It was also a bit thicker, and would have required more sanding of the bezel. I opted for a size that I had multiple of, so I assume it's the standard size you'd use on a Sub. I hope that helps, and sorry I can't be more precise on that point. Just get a couple different sizes from Gary if you are unsure.
Sorry for the shitty pics, and also sorry I didn't think to get some "before" shots. Hope this helps, fellas!
The Clarks visually appears a tad wider than the stock, press-in crystal/gasket combo, in part because the crystal snaps into the gasket differently (Clarks gasket too). It looks a TON better because the Clarks has the polished edges to the crystal, where the stock one has opaque edges that a less smooth.
Before anyone asks, I don't know what height gasket I used. I had an assortment, and I was initially going to go with a tall one, but it looked like it would be TOO tall. It was also a bit thicker, and would have required more sanding of the bezel. I opted for a size that I had multiple of, so I assume it's the standard size you'd use on a Sub. I hope that helps, and sorry I can't be more precise on that point. Just get a couple different sizes from Gary if you are unsure.
Sorry for the shitty pics, and also sorry I didn't think to get some "before" shots. Hope this helps, fellas!