• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

CF Pepsi picture leaks BLRO

M

mnkoshka

I'm Pretty Popular
Supporter
Certified
28/12/09
1,692
800
113
KJ2020 said:
Bro I've seen that effect in pics before, not just QCs but In some of my own. I don't think it's bleeding of blue through the platinum but rather the platinum reflecting the blue from the surrounding insert.

You can see some blue tints in the platinum on this CF QC pic from another thread. But I really doubt it would be seen by eye IRL.

j3FZlv.jpg
Click to expand...

Thanks for the feedback mate, i accepted it so can’t wait to see it in the flesh


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: KJ2020
H S

H S

Smuggler
Supporter
Certified
10/6/21
765
2,552
93
USA
I'm very, very pleased with my CF Pepsi. A few whirls of the wrist got it up and running. Tomorrow I'll take off the wrap/stickers and remove a few links. Then I can finally post in the Eyecandy and Wristshots thread.

KJ2020- you are truly on another level, my friend. :worthy:
 
  • Like
Reactions: m5smg2
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
35,452
70,229
113
Ham Solo said:
I'm very, very pleased with my CF Pepsi. A few whirls of the wrist got it up and running. Tomorrow I'll take off the wrap/stickers and remove a few links. Then I can finally post in the Eyecandy and Wristshots thread.

KJ2020- you are truly on another level, my friend. :worthy:
Click to expand...

Meh, just been hangin around a while bro but thanks!
:drinks_cheers:
 
Last edited:
  • Like
Reactions: H S
KJ2020

KJ2020

Time Traveler
Supporter
12/3/18
35,452
70,229
113
In case anyone was wondering, the digital images from Rolex still show the 2021 BLRO's to have the bezel lip, and the BLNR and CHNR do not. No difference whether it's oyster or jubilee, or FG vs TT on the CHNR.

j3SVk3.jpg
 
  • Like
Reactions: MikeMeezy77, cpd2186 and Mille M
vipstyle888

vipstyle888

Known Member
18/2/19
127
61
28
Hong Kong
mnkoshka said:
Some VR date discs seemed to rotational backlash or play, this is due to the date finger spring tolerance. Every VR movement I’ve put a gen datewheel in I’ve had to modify the date finger spring. This enables the finger to be at full stroke and properly have both angled surfaces fully engaged between the teeth of the datedisc which eliminates any free play and odd positioning.


Sent from my iPhone using Tapatalk
Click to expand...

How did you exactly modify it? Noticed some of my dates are not centered but in a bad low position.
 
BoobBandit

BoobBandit

resident fallguy
24/5/21
85
63
18
wouldn’t you like to know
aec7482c9fcbcbc779d10df0148361d2.jpg

52f064672dde58586ae1c260ab636c76.jpg

The ‘bezel lip’ doesn’t figure as a design characteristic that is deliberate. The so called lip (and if there are shop drawings with tolerances specifically measuring the surface area, I’d like to see it). If the flat area next to the outer edge of the ceramic disc is being called a deliberate design characteristic, it appears a few microns wide, not even more than a few millimeters. Perhaps a different tooling configuration. In any case, it’s miniscule to be sure. A set of shop drawings with specific nomenclature delinitating the surface area prescribed means it’s a deliberate design.


Sent from my iPhone using Tapatalk
 
D

Duckber

I'm Pretty Popular
16/8/19
1,585
868
113
BoobBandit said:
The ‘bezel lip’ doesn’t figure as a design characteristic that is deliberate. The so called lip (and if there are shop drawings with tolerances specifically measuring the surface area, I’d like to see it). If the flat area next to the outer edge of the ceramic disc is being called a deliberate design characteristic, it appears a few microns wide, not even more than a few millimeters. Perhaps a different tooling configuration. In any case, it’s miniscule to be sure. A set of shop drawings with specific nomenclature delinitating the surface area prescribed means it’s a deliberate design.


Sent from my iPhone using Tapatalk
Click to expand...

Those are a lot of fancy words for someone in denial about their inaccurate replica.
 
Last edited:
D

Duckber

I'm Pretty Popular
16/8/19
1,585
868
113
BoobBandit said:
If you’ve got anything substantive to add, I’m all ears


Sent from my iPhone using Tapatalk
Click to expand...

There are thousands and thousands of photos of the genuine Pepsi that has a thick lip, with a few gen owners stating it is glaringly apparent, even in this very thread. There are rep owners for this watch who straight up say it is not apparent, even those who have modded their bezel to puff up the bezel to make a lip. To not care about it is one thing, but to straight up make up all this nonsense like it's not deliberate or that your lip looks fine relative to gen is delusional.
 
Last edited:
  • Like
Reactions: Uhr70 and StreetFighter
BoobBandit

BoobBandit

resident fallguy
24/5/21
85
63
18
wouldn’t you like to know
False. The pretense is not whether the lip is there or not, it’s whether it’s a casualty of machining, tooling, whatever. Evidenced by the fact that one production run of gen has it wheras the other does not. Without actual construction documents, it’s conjecture i.e. spinning wheels over nothing of substance


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Rusty_Shackleford and Sonofalich
D

Duckber

I'm Pretty Popular
16/8/19
1,585
868
113
BoobBandit said:
False. The pretense is not whether the lip is there or not, it’s whether it’s a casualty of machining, tooling, whatever. Evidenced by the fact that one production run of gen has it wheras the other does not. Without actual construction documents, it’s conjecture i.e. spinning wheels over nothing of substance


Sent from my iPhone using Tapatalk
Click to expand...

Show me any generation of a Ceramic Pepsi without the lip?
 
You must log in or register to reply here.
Top Bottom