CF Daytona Panda V2/V3 Shifted Dial

[Bigsmasher]

I did exactly the same thing where I unscrewed one of the retainer clips and it was a PITA to put back. If you look at the image below, I unscrewed these 2 blue screws and tried to push in the red direction (not on the rotor). Mine wouldnt shift though. Those blue retainer clips are pushing against the case so it doesnt have give. Any tips? Thanks!

Bump!

 

[fakeprophet]

I lost one movement tab the second time I tried this, can someone please let me know where to get a 4130 movement tab please?

 

[nightowl77]

To add:
Also unscrew the crown into winding position before you do that otherwise the whole movement would be fixed at the case tube and not movable.

It’s about this screw & clamp by the way. The second one is on the opposite, here hidden by the rotor:

So just two screws to undo and fix shifted dial? The one you marked with arrow, and another one opposite hidden by rotor?

 

[wubsub]

So just two screws to undo and fix shifted dial? The one you marked with arrow, and another one opposite hidden by rotor?

two screws will loosen the movement and you'll be able to shift the dial. important not to put too much pressure on the stem or brush and scratch the dial along the rehaut

 

[miniost]

So just two screws to undo and fix shifted dial? The one you marked with arrow, and another one opposite hidden by rotor?

Did you managed to fix it?
Just two screws and then rotate the whole thing or do you just "slide" the dial a bit?

 

[nightowl77]

Did you managed to fix it?
Just two screws and then rotate the whole thing or do you just "slide" the dial a bit?

Tbh, I didn’t. I learnt to kind of live with it. There’s gens with slight shifted dials as well if it makes you feel better!

 

[miniost]

Tbh, I didn’t. I learnt to kind of live with it. There’s gens with slight shifted dials as well if it makes you feel better!

Thanks for your fast reply!