Can’t find stem for this movement.

[Flashg81]

Hello, need some help as a friend has broken the stem in his breitling and I have removed the old stem and used an allum mix to remove the rest of the broken stem from the crown so it is all good to go. He thought the movement was 7750 but I’ve purchased stem and it is was to large. Can anyone help identify the movement so I can get him a stem, thanks in advance.

 

[Raddave]

Thats one of those Z2 POS movements , you wont be able to buy new parts for it

 

[Hor-Fan]

If you still have the broken end of the stem, you might be able to repair it with a stem extender.

 

[jacquy]

Nice,never seen before.How is it working?Where is it to find?

 

[derjenigewelcher]

 

[Flashg81]

Raddave why can’t I get spares for it? Just curious?

 

[vdusanv]

I have a same movement but stem is broken very near and can not use extention. Is there realy nowhere to buy of find this stem ? Help please. Thanks

 

[derjenigewelcher]

Hello, need some help as a friend has broken the stem in his breitling and I have removed the old stem and used an allum mix to remove the rest of the broken stem from the crown so it is all good to go. He thought the movement was 7750 but I’ve purchased stem and it is was to large. Can anyone help identify the movement so I can get him a stem, thanks in advance.

Try a stem for a 2824-1 (0.6mm diameter sqare, not 0.8mm)

https://de.aliexpress.com/item/3287...o2deu&spm=a2g0o.order_list.0.0.21ef5c5fALmMMh

 

[WolfKissed]

Looks a Jaragar watch! I will look around, I might have a stem for this. If I do, happy to help. Otherwise the stem extended should work


Sent from my iPhone using Tapatalk

 

[vdusanv]

Try a stem for a 2824-1 (0.6mm diameter sqare, not 0.8mm)

https://de.aliexpress.com/item/3287...o2deu&spm=a2g0o.order_list.0.0.21ef5c5fALmMMh

I removed also a stem and tried 2824 but it is too thick, it is somehow different, here is a picture..broken one

Poslano z mojega SM-A525F z uporabo Tapatalk

 

[derjenigewelcher]

2824-2 ist thicker than the older 2824-1 ones thats what i meant

 

[vdusanv]

2824-2 ist thicker than the older 2824-1 ones thats what i meant

Will try to order...

Poslano z mojega SM-A525F z uporabo Tapatalk

 

[ShiroTenshi]

not sure if its a new 2824 is compatible with this POS movement? if yes just swap it for the better 2824.

 

[Hor-Fan]

The Z2 is a phony 2836 “clone”, I think it can be replaced with a legit A2836 or Eta 2836, but IIRC you will need to source new hands as the Z2 pinions are not the same size as an actual clone.

 

[vdusanv]

The Z2 is a phony 2836 “clone”, I think it can be replaced with a legit A2836 or Eta 2836, but IIRC you will need to source new hands as the Z2 pinions are not the same size as an actual clone.

Maybe you know sizes for hands set?
I did some measurements and stem for 3804 is very close to z2, (https://www.cousinsuk.com/product/chinese-movement-stems), only A is on Z2 0.51mm, on 3804 is 0.54mm, other looks the same, do you think guys?

Poslano z mojega SM-A525F z uporabo Tapatalk

 

[vdusanv]

A:54 - B:68 - C:120 - D:90 - E:364 - F:37 (No.2) DG3804

A:51 - B:67 - C:120 - D:90 - E: 364 - F: 37 
my old Z2 movement stem

Poslano z mojega SM-A525F z uporabo Tapatalk

 

[Hor-Fan]

A:54 - B:68 - C:120 - D:90 - E:364 - F:37 (No.2) DG3804

A:51 - B:67 - C:120 - D:90 - E: 364 - F: 37 
my old Z2 movement stem

Poslano z mojega SM-A525F z uporabo Tapatalk

Give it a shot, might work…might not.

 

[vdusanv]

Ok friends, finally I took a time and tried a new stem 3804B. And a result?
It fits and works perfectly . This really looks like mixed between eta clone (hands 2824 fits, stem remove like on 2836 and 2824 movement) and DG 3804B .
Now all I need is CRPO crown, if I can't find it I will sell movement, dial and hands.
Hope I helped someone.

Poslano z mojega SM-A525F z uporabo Tapatalk