I use the lapping machine, sander machine, and by hand with paper in some corners.Lovely job. Thank you for sharing.
May I ask you which tools, did you use?
I was literally smoothing out some hard edges on a cheap quartz version of a 16202, and I'm quite curious about your approach.
Cheers
L
AP and Patek have different surface finishings. The AP brushing is typically coarser and more visual whereas the Patek one is softer and more refined.Thank you for the quick reply!
For guitar polishing I normally start at 400 grit and I stop at 1500 or 2000 if I want to have a matt finish.
I use polishing compound if I want to achieve a gloss polished final result instead.
Yesterday, while working on my Oak rep I was using 320 to smooth (and re- shape) some details on the links and bracelet, and then using some pads and steel wool to keep the brushing finish similar to how the rep came from the TD.
May I ask you which grit(s) or polishing pads or steel wool you used here?
In a sense, I noticed that the brushing on the Oak seems a bit stronger or coarser than the brushed finish that I see on my nautilus rep made by @legend
Also, I noticed in a few AP and PP videos that watchmakers use thin wooden stick or small batons to support sand paper or polishing pads, and I tried that and indeed it helps to achieve a good regular finish.
Thanks a lot again
L
ExactlyAP and Patek have different surface finishings. The AP brushing is typically coarser and more visual whereas the Patek one is softer and more refined.
For AP, there are also different types of brushing employed for different models and also watches sent in for service typically come out looking different as the additional brushing is done along the existing finish instead of having them polished off and redone.
Hi @Johnny Depp
I had the same feeling.AP and Patek have different surface finishings. The AP brushing is typically coarser and more visual whereas the Patek one is softer and more refined.
For AP, there are also different types of brushing employed for different models and also watches sent in for service typically come out looking different as the additional brushing is done along the existing finish instead of having them polished off and redone.