I might try to reach out in the future to get information on straps. Thanks.Thank you, dear P.
These pictures are from two more of my customers.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Bronzo watch thread
- Thread starter koko105
- Start date
- 18/12/15
- 10,018
- 14,813
- 113
24 hours yielded very little result.
48 hours next milestone
48 hours next milestone
- 17/10/20
- 1,109
- 1,223
- 113
I saw a masterclass from @C Master at patinating a bronze Panerai on RWI. Unfortunately, the photos have disappeared. Is there any possibility of recovering them. https://www.rwg.bz/board/index.php?...cs-here/&page=74&tab=comments#comment-227451624 hours yielded very little result.
48 hours next milestone
It was these photos that inspired me to create an embossed strap with bronze patina for Panerai
I downloaded them to see what to aim for and to get the colour right.
@Tan_Go thank you for letting me know the images were gone. I had them in storage so I could upload them again.A Bronzo journey:
It had patina
Patina removed by soaking in lemon juice.
Dipped in salt water before new patina.
Placed into a tub with ammonia, Bottle cap used to keep the watch out of direct contact with the ammonia. Then sealed for about 10 minutes.
The result
Cleaning it up
On the wrist
Cleaned lightly with a toothbrush and lemon juice to return it back to a light copper look.
A Bronzo journey:
It had patina
Patina removed by soaking in lemon juice.
Dipped in salt water before new patina.
Placed into a tub with ammonia, Bottle cap used to keep the watch out of direct contact with the ammonia. Then sealed for about 10 minutes.
The result
Cleaning it up
On the wrist
Cleaned lightly with a toothbrush and lemon juice to return it back to a light copper look.
It had patina
Patina removed by soaking in lemon juice.
Dipped in salt water before new patina.
Placed into a tub with ammonia, Bottle cap used to keep the watch out of direct contact with the ammonia. Then sealed for about 10 minutes.
The result
Cleaning it up
- 18/12/15
- 10,018
- 14,813
- 113
48 hours
My conclusion is that the New VSF factory uses a poorer or bronze / steel mix on the 42mm.
Back in the tub you go!
72 hours next…
My conclusion is that the New VSF factory uses a poorer or bronze / steel mix on the 42mm.
Back in the tub you go!
72 hours next…
- 9/12/18
- 2,415
- 9,802
- 113
Definitely recommend the Prob Crystal if you don’t have one… way better quality and removed the fish eye effect
What happened after 72 hours?48 hours
My conclusion is that the New VSF factory uses a poorer or bronze / steel mix on the 42mm.
Back in the tub you go!
72 hours next…
- 17/10/20
- 1,109
- 1,223
- 113
I had the strap patinated on Saturday.A Bronzo journey:
It had patina
On Sunday I put the bronze die to oxidise in a vessel. Today I removed the die from the vessel with this colourful oxidation.
This is the vibrant range of colours I got. Look how beautifully it goes with the strap
- 17/10/20
- 1,109
- 1,223
- 113
