Offering $300usd shipped to CONUS for new Clean Factory V3 LV Insert.
Usd300? Li told me he does not even sell the insert by itself. I was like “hmmmmm....”
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Bezel and Dial Review of ZZF V2S 116610LV Submariner and Comparison vs. Gen, ARF V3 and Noob V10
- Thread starter jtimewatch
- Start date
Usd300? Li told me he does not even sell the insert by itself. I was like “hmmmmm....”
so my qc are here and i’d like to have your opinion on the red marks i’ve put on each photo. gaps seems a little to big and there is a line in the cyclop. the movement readout also says +5s/d which seems a bit too much. what do you think?
Man, 5 spd is almost COSC standard.
There are 86400 seconds in a day. Yours gains 5 seconds, which means its error can be calculated at a shy ~0,005%.
What did you expect, just to be curious?
Last edited:
The cyclops line is just a reflection, the gap looks from that angle but its fine n IRL SEL would look just as tight as it should, no gaps would be visible. 5seconds is great accuracy...
so mate your watch is perfectly fine, I would approve it asap if I were you
- 12/3/18
- 34,677
- 66,784
- 113
so my qc are here and i’d like to have your opinion on the red marks i’ve put on each photo. gaps seems a little to big and there is a line in the cyclop. the movement readout also says +5s/d which seems a bit too much. what do you think?
The line in the cyclops is a reflection from the date. Movement readout is fine. You have to decide about the lug gap. I know what I would do, seeing so many pics of ones with no gaps.
i received this QC from andrew and i’m wondering what happened to DW which seems different from standard ZZF
so my qc are here and i’d like to have your opinion on the red marks i’ve put on each photo. gaps seems a little to big and there is a line in the cyclop. the movement readout also says +5s/d which seems a bit too much. what do you think?
Reject it!
90% of QC didn't have issue ! I RLed one with smaller gaps ans After have a nice one. Be patient
My bad this time that’s actually true, it’s -4/+6
You correct me once, I correct you once.
We're even now bro lol
Got mine 5 days ago. Very good movement (-5s/d), smoother and more precise than my seiko SPB051J1 wich cost 1000€. Weight is 3 grams heavier than my gen sub. Bezel is beautiful and look gen. To me, better crystal with AR coating on cyclop, better clasp and it’s a perfect rep for the price. Thanks Li
It’s a stunning rep and for the price it’s a no brainer. I’m resisting to pull the trigger on this one because of the big ass gap in the serial number. Funny thing is I would never of noticed this before, but after months on this forum I have developed a bit of a eagle eye (Compared to before) and ocd haha. I feel lucky to only spot certain flaws compared to the experts (who have probably forgot more than I know lol) who will see a full list of flaws.
i received this QC from andrew and i’m wondering what happened to DW which seems different from standard ZZF
This is not ZZF. Different serial, different date window, and no rounded corners on hour markers.
M4rk87
Getting To Know The Place
- 22/3/20
- 23
- 1
- 3
The gap on the serial number doesn’t really bother me. But the sels in some of the shots looks like they have a wider gap than some others I’ve seen here. In other pics looks fine. Not sure is my ocd kicking in or it’s normal to have a little gap there
hello, after reading the various discussions on the movements that mount the v2s, I decided to contact my TD to give me clarifications on the movement that mounts zzf ..... well he says that it does not mount a vr3135 but mounts sh3135.
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
I saw your qc and yes there is a little gap but recession is very good,so you must decide bro
- 25/3/17
- 4,310
- 3,803
- 113
Offering $300usd shipped to CONUS for new Clean Factory V3 LV Insert.
If you write to Li you will pay an half ;-)