Bezel and Dial Review of ZZF V2S 116610LV Submariner and Comparison vs. Gen, ARF V3 and Noob V10

RetFed · 6/4/20

LuoIsBoss said:
But what we can judge is that the insert engravings are deeper, which is pretty sad. The same goes for the CGs, they're narrower than the V2.

But from these pictures and my own imagination, I think that the V2s insert is just a tad more apple-green than the V2, but we'll see. I have ordered a V2s insert only (please don't pm me, where I got it)

Okay I won't PM you, where did you get it? ????

Sent from my iPhone using Tapatalk

Mark1937 · 6/4/20

xartan said:
But it says POLEX!!!

Of course Bro. It is a rep! Factory can't write "R"olex!

:biggrin-new:

RetFed · 6/4/20

LuoIsBoss said:
But what we can judge is that the insert engravings are deeper, which is pretty sad. The same goes for the CGs, they're narrower than the V2.

But from these pictures and my own imagination, I think that the V2s insert is just a tad more apple-green than the V2, but we'll see. I have ordered a V2s insert only (please don't pm me, where I got it)

Okay I won't PM you, where did you get it? ????

Sent from my iPhone using Tapatalk

mari115 · 6/4/20

LuoIsBoss said:
There you go guys.

Is it me or the V2S’ cyclops is way better than the V2? Looks like they managed to put the white-ish UV coating on the sides of it. Or is it the lighting?

Inviato dal mio iPhone utilizzando Tapatalk

RetFed · 6/4/20

LuoIsBoss said:
But what we can judge is that the insert engravings are deeper, which is pretty sad. The same goes for the CGs, they're narrower than the V2.

But from these pictures and my own imagination, I think that the V2s insert is just a tad more apple-green than the V2, but we'll see. I have ordered a V2s insert only (please don't pm me, where I got it)

Okay I won't PM you, where did you get it? ????

Sent from my iPhone using Tapatalk

KJ2020 · 6/4/20

xartan said:
But it says POLEX!!!

Haha, good one bro. At least it doesn't say Pofex, arghh... What a turd word.

jodelaplaya · 6/4/20

LuoIsBoss said:
There you go guys.

Différent lightning, see the case the jtimes pannel, difficult to judge ..

Mr Heuristics · 6/4/20

Marco1937 said:
Receve today QC pics and approve.

Sel's are perfect.

Sorry to quote the whole post, BUT, the 12:00 index is a hair to the left of the cornet.

I just received my QC from JTime and my dial has the same exact issue. Looks like the same picture.

I GL'd anyway because if anybody looks that hard at my watch without my consent they have a lot more to worry about than me wearing a rep. #ApocalypseRules

Maybe this is a ZZF issue.

rolex79 · 6/4/20

Mr Heuristics said:
Sorry to quote the whole post, BUT, the 12:00 index is a hair to the left of the cornet.

I just received my QC from JTime and my dial has the same exact issue. Looks like the same picture.

I GL'd anyway because if anybody looks that hard at my watch without my consent they have a lot more to worry about than me wearing a rep. #ApocalypseRules

Maybe this is a ZZF issue.

Could you ask him to do a V2 and V2S comparison?

Mr Heuristics · 6/4/20

rolex79 said:
Could you ask him to do a V2 and V2S comparison?

I could. But I don't want to.

He already provided a side by side above. I think that dialing in the exact lighting for the comparison is above both of our pay grades. Also, "please" goes a long way w me.

I'm sure there will be a flood of comparison photos within a week or two taken in every lighting condition known to man as these watches arrive at their new homes.

d3s19n · 6/4/20

Mr Heuristics said:
Sorry to quote the whole post, BUT, the 12:00 index is a hair to the left of the cornet.

Oh man it’s too consistent to ignore! Almost as if they designed it that way for people in the know to always be able to tell real quick

Mark1937 · 7/4/20

Mr Heuristics said:
Sorry to quote the whole post, BUT, the 12:00 index is a hair to the left of the cornet.

I just received my QC from JTime and my dial has the same exact issue. Looks like the same picture.

I GL'd anyway because if anybody looks that hard at my watch without my consent they have a lot more to worry about than me wearing a rep. #ApocalypseRules

Maybe this is a ZZF issue.

yes I had noticed. I have seen worse on the index at 12 o'clock. However, it is easy to adjust it. The rest is so perfect that I accepted.

rolex79 · 7/4/20

Mr Heuristics said:
Sorry to quote the whole post, BUT, the 12:00 index is a hair to the left of the cornet.

I just received my QC from JTime and my dial has the same exact issue. Looks like the same picture.

I GL'd anyway because if anybody looks that hard at my watch without my consent they have a lot more to worry about than me wearing a rep. #ApocalypseRules

Maybe this is a ZZF issue.

Could you ask him to do a V2 and V2S comparison?

ABC123 · 7/4/20

d3s19n said:
Oh man it’s too consistent to ignore! Almost as if they designed it that way for people in the know to always be able to tell real quick

even the pieces out of the Rolex factory has this issue.

d3s19n · 7/4/20

ABC123 said:
even the pieces out of the Rolex factory has this issue.

Gotcha... didn’t know

Mr Heuristics · 7/4/20

ABC123 said:
even the pieces out of the Rolex factory has this issue.

How odd.

This is really working against my motivation to buy anymore gens. Especially since they're being ridiculous w the wait lists.

If Guangzhou can pump out a grip of pieces for a minuscule fraction of the price, Geneva can pick up the pace. But no, they have to keep fronting and keep the demand high- watch that backfire for them.

I lost interest and started looking at reps when my two year old sub stopped working because I was wearing it while chainsawing a rose bush for 2 minutes this summer. And the wait to get it back is ridiculous even though its under warranty. I'm over it.

ABC123 · 7/4/20

On the Noob v10 that I received a couple days ago. The alignment is actually worse than here but I accepted since I knew this was also an issue with some gens. Now everything else on that noob looked good from a QC perspective. My main beef with the noob is that I'm not convinced whether the rehaut depth and angle are correct. ZZF looks better.

GrandmasterChime · 7/4/20

ABC123 said:
On the Noob v10 that I received a couple days ago. The alignment is actually worse than here but I accepted since I knew this was also an issue with some gens. Now everything else on that noob looked good from a QC perspective. My main beef with the noob is that I'm not convinced whether the rehaut depth and angle are correct. ZZF looks better.

Theres nothing wrong with the rehaut depth and angle as far as I'm aware on the noob v10

HuyTech · 7/4/20

has anyone in here order from one of our trusty dealer on this watch? I've got the QC picture and approve it, but it take so long for it to ship out....all this covid19 is killing everyone. dang it...

xxBlack · 7/4/20

HuyTech said:
has anyone in here order from one of our trusty dealer on this watch? I've got the QC picture and approve it, but it take so long for it to ship out....all this covid19 is killing everyone. dang it...

8 days now.

Gesendet von iPhone mit Tapatalk Pro

Bezel and Dial Review of ZZF V2S 116610LV Submariner and Comparison vs. Gen, ARF V3 and Noob V10

Renowned Member

Respected Member

Renowned Member

Respected Member

Renowned Member

Time Traveler

Active Member

Known Member

Active Member

Known Member

Renowned Member

Respected Member

Active Member

Active Member

Renowned Member

Known Member

Active Member

Agent Provocateur

Getting To Know The Place

Active Member