-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
APW 5168G QC
- Thread starter Harruchi
- Start date
serumdiesel
Madman
- 17/3/21
- 742
- 658
- 93
- 4/7/09
- 1,178
- 713
- 113
Agree good looking piece. I'd be curious to know what the thickness is.. Would you let us know when it arrives? TD quotes it at 8.6 which if true would be fine. ZF's are quoted as 8.8 but measure closer to 9.4. My 3KF is 8.3 and mine weighs 87g vs this tungsten at 114. The main appeal to me of the OEM version is 表带和扣与原装互换 Strap and clasp interchangeable with the original which would make upgrading to gen strap a cinch. I wish all reps were like this. Enjoy!
Dealer told me its 8.3 but I'll measure it when it's here its current on the way to me.
Nice watch!
Is it APW or OEM (or is this the same facrory?)
Clone movement like 3KF?
Is the case rounded at 8 and 10 Position or dors the case need reshape like 3KF and ZF?
Is it APW or OEM (or is this the same facrory?)
Clone movement like 3KF?
Is the case rounded at 8 and 10 Position or dors the case need reshape like 3KF and ZF?
Looks to be a 3KF clone movement with engraved plates to me. The case also seems to be more rounded to me than a stock 3kf one. I got mine from a non-TD at 770ish.
BIONONE
Respected Member
- 28/4/17
- 3,731
- 3,048
- 113
It is not a 3KF movement. The architecture is slightly different, bridges are a bit wider allowing for bigger anglage. They also appear to be a bit thicker - at least visually. The engravings are still poor and the balance cock looks like it is obese in serious need of a calorie deficit. Compared to 3KF the differences are not closer to gen and the Geneva stripes look rough at best.
It looks like they got access to the peacock base movement and manufactured their own bridges which would leave their reliability to be proven...
Anyways a nice touch to the stock 324SC monopoly previously dominated by 3KF.
- 25/9/22
- 9,388
- 25,993
- 113
These movements 324/330 were not/are not freely accessible outside of 3KF and rumor is Clean soon, so I agree with this assessment.
Last edited:
Haven’t worked on many Pateks before but I have a gen 5168 dial I want to use for a franken— any thoughts whether this is the best base to start with now? I know the weight is probably a big factor but in terms of DW, hands, and the rest of the package is the APW better than a stock 3KF?
- 4/7/09
- 1,178
- 713
- 113
Congrats on the gen dial, you could make a great franken with that! I guess you'll want to add a gen strap and WG plate the case too? If so, as mentioned above, I'd wait for the OEM, which claims to accept a gen strap to see what it's like. This case looks great, visually, but I've read elsewhere of SS coated tungsten cases peeling apart, which would give me pause. Add the new untested peacock movement, and the balance for me would shift in favor of using another watch as a base. Personal opinion ofc.
- 3/6/13
- 407
- 463
- 63
Would you mind sharing some pics? Does the strap have the correct khaki color and is the dial matte khaki? Thank you!