- 10/3/24
- 71
- 85
- 18
And a better looking bezelWell, so it's a clean watch with a vs crystal![]()

And a better looking bezelWell, so it's a clean watch with a vs crystal![]()
I don’t see much difference, CF bezel is pretty good for my taste, and im sure they just use the same parts CF use for build theses, as always, so...And a better looking bezel![]()
If you look at the side view of the bezel, the teeth on the VSF are far closer than the teeth on the Clean (Clean teeth are oval). So if you want an off the shelf close to Gen watch (aesthetically), VSF is the clear winner here. If you intend on modifying and replacing parts, then I think it's all to play for, depending on personal preferenceI don’t see much difference, CF bezel is pretty good for my taste, and im sure they just use the same parts CF use for build theses, as always, so...
Indeed, but for being 100% honest, this is the kind of detail I wouldnt notice how oval are the details on bezelIf you look at the side view of the bezel, the teeth on the VSF are far closer than the teeth on the Clean (Clean teeth are oval). So if you want an off the shelf close to Gen watch (aesthetically), VSF is the clear winner here. If you intend on modifying and replacing parts, then I think it's all to play for, depending on personal preference![]()
nice, hope that request comes through quicklyI ordered the Clean v3 and am not planning to do anything to it - gonna wear it OOTB. I requested the Pepsi from my AD and wanted to try it out with the rep first - Also requested the Sprite and looking at rep options for it.
I noticed the VSF is cheaper on Steve’s website - should we infer that Steve thinks VSF is not as good as clean, or only that VSF is competitively priced lower than clean and Steve is passing on the savings to us?
That's why we dont need to be so picky when flexing rep with gen ownergen owners who only buy gens obviously dont notice
gen owners who buys reps notice, when i bought my gen pepsi i noticed the way the light reflects off the scallops on the bezel, we look out for the details because we want the most gen-like watch. if you just buy gen, thats all you know so there's no comparison to be made to articulate the details
nice, hope that request comes through quickly
Not holding my breath! I have decent spend history with this AD but still expect to wait a year or more to get a new gen Pepsi, which is ok as I’m not in any hurry…. Not with a nice clean v3 to wear!
I’m also going to order the VSF v3 - then I can decide which one looks best on the wrist and give the other to one of my kids.
This set of comparison photos features a C Factory sample from about two months ago.My thoughts are the same The VSF does look to have maybe more pluses than the Clean used in comparison, however maybe @steve_theonewatches could confirm if the Clean is one of their latest models or an older one, Im pretty sure some models do have some different parts used from time to time when stock might be low so some Clean's or other brands might be sub par to their normal offerings depending on the if demand and stock didn't work out when being built.
The Gen look pretty battered but you can see the lip on the bezel is more pronounced but that the clean an VSF do have a small lip compared to the older versions.
Id be inclined to try a VSF if they did come as tidy as these unless like you say this is a show piece launch where it shows how good they can be but production models might make use of what parts they have available at time of building.
Looks good though and some of the shots the bezel insert looks better than the gen. The Gen model looks to be not the latest bezel insert as the 23 on models often have a much darker blue and that looks to be a little lighter, but this just goes to show that even gens have differences.
Great work Steve
If you get one then post back some user pictures of it the QC ones will be a good start and then some user shots up close so we can all see shots that are not promotional ones as I often fear promo release models may always be the best attention to detail so when comparing against a real world purchase might often be a little misleading but fingers crossed this is what a stock model will be as it ticks quite a few boxesI had literally placed my order for the BLRO CLEAN version with PT a few days ago only to see the VSF version to literally appear in their product catalogue 2 nights ago.
Given both are the same price and having read the opinions in this thread, Iam now heavily considering to change my order to the VSF as was also recommended by PT this edges it over CLEAN.
So thats what I will do! Im excited, what were the odds of placing the order only to learn of this release?! Once pre-ordered and eventually in my hands I will certainly share pics!
Good to start seeing videos of these. Makes me hopeful I'll receive my QC photos sooner than later.鉴赏VS对比可乐圈优缺点是什么?丹东3285机芯来袭_哔哩哔哩_bilibili
Hoeet3, 视频播放量 329、弹幕量 0、点赞数 2、投硬币枚数 2、收藏人数 0、转发人数 2, 视频作者 小天Hoeet1, 作者简介 关注加点赞,喜欢Hoeet1,相关视频:VS可乐圈和C厂哪里不一样?,Vs新品格林,可乐圈,丹东3285机芯,【全网最狠测评第1季】C厂V3劳力士可乐圈VS瑞士专柜!3285机芯放大500倍竟分不出真假?,VS可乐圈新款3285机格林尼治GMT爆款,CLEAN厂也用丹东4131机芯了,Vs配重钢迪全金壳,丹东4131机芯,VS格林尼治V3可乐圈...www.bilibili.com
you can see the bezel action in this review, skip to 2:47, it's alot better than Clean, more stiff, no backplay, etc
but i think maybe it needs a bit of lubrication, the opposite problem of clean LOL
definitely better than clean, but talking out of my ass since i haven't had it in hand,
First batch just released so if you are one of the lucky ones you'll get your QC soonGood to start seeing videos of these. Makes me hopeful I'll receive my QC photos sooner than later.