I received mine and I gave no idea how to size the bracelet. The screws are so damn small. Very frustratingMore issues on Blue dial index alignment. Black one looks good. Blue all the stick indicies are low/high.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
RXWF Glashutte Spezialist Diver New Release (Comparison vs. Genuine)
- Thread starter jtimewatch
- Start date
- 16/4/22
- 481
- 546
- 93
I think the srews on the downside are locking bolds. You need to rotate them 90° to release them. Afterwards you should be able to remove the bolds (1) or caps (2), which are holding together the segments, sideways.
I don't have a screwdriver small enough to engage to locking bolds right now, those bolds are TINYI think the srews on the downside are locking bolds. You need to rotate them 90° to release them. Afterwards you should be able to remove the bolds (1) or caps (2), which are holding together the segments, sideways.
This is not true , there are no pins on the side onky a few gave pins right by the clasp.I think the srews on the downside are locking bolds. You need to rotate them 90° to release them. Afterwards you should be able to remove the bolds (1) or caps (2), which are holding together the segments, sideways.
Does anyone know how to size this freaking bracelet????
Incredibly frustrating after buying the watch
I don't know, just an idea...
And maybe this helps: https://forum.watchlounge.com/index...ht-das-derzeit-beste-stahlband-auf-dem-markt/
I don't know, just an idea...
And maybe this helps: https://forum.watchlounge.com/index...ht-das-derzeit-beste-stahlband-auf-dem-markt/
Yeah, it's not obvious until you work out what's going on...
So those screws are just 'locks' - when the line on the head is parallel to the bracelet sides they're locked, when the line on fht head us perpendicular to the sides they're unlocked.
So to resize you need to 'unlock' the two screws on one of the side link and then that side link will pull right off the pins it was locked onto. The corresponding link on the other side can then be pulled out through the centre link without it's screws being loosened at all (pins will remain locked in that side piece as it slides out). Do this on adjacent pieces and you will start to have a pile of the centre links coming free.
Reverse to put back together, lol.
Hope that helps. My watch shipped with the heads a bit messed up, think someone had a go at the TD or factory too. Oh well.
How's the build quality in hand for the members that have received theirs?
Those screws are not the best quality and judging by the state of mine somewhat easy to mess up so I'd use the right tool for the right job ™.
But they're not super-super-never-been-seen-before tiny. One of those little cheap screwdriver sets you can get for fixing the arms on eyeglasses should do the job? I actually just used the smallest flathead I had in a little tech set for fixing phones etc.
Yeah, I'm pleased with the build.
I mean the case is the case and steel so no qualms there. As for bracelet feel I'd say it's kind of similar, maybe not quite, VSF sub level but defo a step above the likes of a ZF bracelet on their Tudor or VC if that helps?? I'm not too au fait with a vast array so finding it hard to find a comparable but I think it's solid enough.
As mentioned above the screws are a bit shitty and will get easily marked and semi-stripped so you need a bit of care there but that should be a one and done I guess.
- 16/4/22
- 481
- 546
- 93
Saw these posted up today. The blue is REALLY different. It's unclear from the translation if this is a seperate release or the 2nd batch run of the SeaQ that has a really different color? Anyone know anything more?
There were new pics of the black model as well.
There were new pics of the black model as well.
I guess the blue dial could be the lighting but the black dial... gen doesn't have the metal numbers/markers does it? Thought it was just lume direct onto the dial on that version. Looks great, but just not gen-line??
- 16/4/22
- 481
- 546
- 93
Where did you see these pictures posted on?Saw these posted up today. The blue is REALLY different. It's unclear from the translation if this is a seperate release or the 2nd batch run of the SeaQ that has a really different color? Anyone know anything more?
There were new pics of the black model as well.
There's lots of versions of the SeaQ released, including the black dial standard date with applied numerals. Chill, this is true to a version of gen.
