Review - Patek Philippe Multi-Scale Chronograph 5975P – Limited Edition 175th Annive

[Godfathar]

Godfathar mate have you asked Watchfinder about the anniversary deployant? I know he sells the normal Patek deployants separately too. My 5975R is on its way, will get it next week. Was thinking of asking him.

I have never seen the 175th anniversary edition buckle anywhere. I don't think it was made.. but please if you get to ask him if he would source a rep buckle that is for the 175th anniversary edition I would truly appreciate it. Or else, we should find someone that would make it customised.

 

[jm_brc_7057]

Godfathar I will ask him. Not a bad idea.to get it custom made. Actually it is only the pin buckle part that is different. The rest of the deployant is the same.
if they have to make it custom made it's only the pin buckle's outer ring with the engravings, that has to be made. The cross logo can be used from the non anniversary version.

 

[jm_brc_7057]

Only this part needs to be made. Then it can be fitted on to the normal version deployant.

 

[Godfathar]

In all honesty, I don't think it is that easy.. depending on how good the person doing it..

 

[jm_brc_7057]

Hello guys. I just want to revive this excellent thread by Godfathar with a couple of pictures and words on the 5975R, which is the rosegold version. A complete review is totally obsolete, as this in-depth review by Godfathar is awesome. And also because i mean no disrespect to the Godfathar

I just got it in yesterday. And i am really enjoying it. It's a really great piece. There isn't much difference from the 5975P reviewed here, other than a few key differences mentioned later.

Here are some pictures:

The watch has some cons that are the same as the 5975P out of the box:

1. The "IS" flaw on the dial is there. But it is considerably insignificant, as it is really small and not visible on the wrist. Even when holding the watch you won't notice unless you are looking for it.
2. The watch has non-functional faux pushers, that are fixed. Can't be pressed. So this is not the kind of watch to hand over to someone. I think it's not possible to change the movement with a chrono movement to get it functional, as the pushers seems fixed.

The rosegold version has some pros over the 5975P:

1. The crystal won't need AR coating. It's lightly AR coated. It doesn't blur the dial, the dial is visible through the crystal just fine.
2. The 5975P was lacking a diamond in the case at 6, which all platinum Patek's have. But the R version won't have this issue, as rosegold Patek's doesn't have a diamond there.
3. The hand is black like the gen. In the 5975P the hand was silver, whereas in the gen it's white.

I highly recommend this version or the 5975G version, as these 3 cons that are in the Platinum version, needed modification, but that isn't the case in the rosegold/whitegold reps.

I have also done a little comparison of the rosegold quality:

As you can see, the ZF 5296R is very yellowish, while the TWF 6102R on the left is very reddish. The 5975R is somewhere in between oozing quality and great finishing of the mirror polished rosegold.

The more red rosegold is, the more copper is added, therefore lowering the gold purity. In gen watches 75% gold is normal in the rosegold alloy.

 

[Godfathar]

You're on fire buddy

 

[jm_brc_7057]

I have never seen the 175th anniversary edition buckle anywhere. I don't think it was made.. but please if you get to ask him if he would source a rep buckle that is for the 175th anniversary edition I would truly appreciate it. Or else, we should find someone that would make it customised.

I asked Watchfinder, he can't get the deployant. I think a custom made one is the way to go. I don't know who to ask, though.

 

[ScuderiaPT]

that TWF 6102R kills me , i love to add one

 

[Godfathar]

I asked Watchfinder, he can't get the deployant. I think a custom made one is the way to go. I don't know who to ask, though.

I wish I knew: (

 

[jm_brc_7057]

 

[m1994]

New member of the 5975 team...

 

[jm_brc_7057]

New member of the 5975 team...

And in what style. Welcome to the party!

 

[Godfathar]

welcome all to the 175th anniversay club

 

[jm_brc_7057]

welcome all to the 175th anniversay club

Thanks for the invite. It's an honor

 

[d3xophen]

but nobody mention which TD can source this 5975.

 

[jm_brc_7057]

but nobody mention which TD can source this 5975.

But they did mate! It's from Watchfinder (Fat Panda). He's a TD here

 

[jm_brc_7057]

Godfathar Mate, sorry to disturb you. But do you know if the pushers on the 5975 can be made pushable? Because i am thinking of getting a chronograph movement installed in it, but it can only be done if the pushers can be made pushable. At the moment they are fixed on mine.

 

[Godfathar]

Godfathar Mate, sorry to disturb you. But do you know if the pushers on the 5975 can be made pushable? Because i am thinking of getting a chronograph movement installed in it, but it can only be done if the pushers can be made pushable. At the moment they are fixed on mine.

They are fixed on mine.. and tbh I don't know if the places of the pushers will align with the chrono movement you're thinking of purchasing. That's if they are also working as pushers to begin with.

 

[jm_brc_7057]

They are fixed on mine.. and tbh I don't know if the places of the pushers will align with the chrono movement you're thinking of purchasing. That's if they are also working as pushers to begin with.

Okay thanks mate. Yeah i was thinking of a ETA 7750 clone. But i don't yet know if the pushers are welded into the case or they are fixed because the movement on the inside is holding them fixed in place. Maybe i'll have to send it to a modder to check.

 

[Alfbast]

And in what style. Welcome to the party!

Hi. Where did u get it?


Inviato dal mio iPad utilizzando Tapatalk