Tutorial: how to refinish the case back screws at a AP ROO

I think a lot of us know this problem, ugly scratched case back screws at a AP ROO.

But it's a easy fix. You just need:

Sandpaper 600 grid
Sandpaper 1200 grid
polishing paste
a dremel with a polish wheel
polishing cloth
and TIME

We also need a good screwdriver because we do not want scratch our screws again after polish!

I found a perfect screwdriver for the back case screws, this one





First we spot the screw we want refinishing.



screw them out





We also need a good tweezer with we can keep up the screw during the entire process



First step is sanding the screw with the p600 paper. Use the tweezer and press the screw not to hard to the paper. Take your time and work slow. we do not want grind too much from the screw.



After using the p600 the screw should look like this



Ok, now we do the same with the p1200 paper



Till the screw look like this



Now it's time to start polishing
I use steel polishing paste gloss and a dremel with a soft polish wheel





Now polish the screw careful with low speed



Now the screw should look like this





much better right?

I polish the screw now with the polish cloth for a better shine



Ok, now we just turn the screw back in place and that's it.









Sent from my iPad using Tapatalk