• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Tudor pelagos shark?

Sc1989

Known Member
30/4/15
195
5
0
f9ef65482a2c7df7f31062a3c4575adc.jpg



Please tell me the rep bezel removes as "easily" as the sub does. Actually don't, because then I'll buy the black and blue today to swap bezels. (I know the shark is black dial blue insert but this is the closes picture I could find)

Sent from my iPhone using Tapatalk
 

waxed

Active Member
20/10/11
202
4
18
Subbed....

My bezel was recently bitten by a sheep. True story. So I've been thinking of getting a replacement. A nice blue one might be just what the doctor ordered.


Sent from a very nice tin can with a really good string.
 

k4jun

Ω Section Moderator
Section Moderator
Certified
25/4/15
2,944
1,235
113
f9ef65482a2c7df7f31062a3c4575adc.jpg



Please tell me the rep bezel removes as "easily" as the sub does. Actually don't, because then I'll buy the black and blue today to swap bezels. (I know the shark is black dial blue insert but this is the closes picture I could find)

Sent from my iPhone using Tapatalk
Very nice!
This inverted shark looks better than any stock blue or black model.
 

Rjw252

Getting To Know The Place
25/1/16
80
1
0
Following up the question the OP mentioned, anyone have any experience removing the Pelagos bezels? Are they as easy to remove and replace as a sub?
 

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,134
2,170
113
Following up the question the OP mentioned, anyone have any experience removing the Pelagos bezels? Are they as easy to remove and replace as a sub?
lol i´m searching the same at the Moment on rwi :) The Bezel can be popped out like on every rolex with a case opener or a knife etc. The Bezel insert is glued in the Bezel ring. You have to heat i up ( heatgun oder in hot water ) and pop the insert out. Than re-glue the new insert and put it back together
 

Rjw252

Getting To Know The Place
25/1/16
80
1
0
Ok...
lol i´m searching the same at the Moment on rwi :) The Bezel can be popped out like on every rolex with a case opener or a knife etc. The Bezel insert is glued in the Bezel ring. You have to heat i up ( heatgun oder in hot water ) and pop the insert out. Than re-glue the new insert and put it back together

Ok... so you buy the black Pelagos , I'll buy the blue one and we trade bezels. Lol
 

k4jun

Ω Section Moderator
Section Moderator
Certified
25/4/15
2,944
1,235
113
lol i´m searching the same at the Moment on rwi :) The Bezel can be popped out like on every rolex with a case opener or a knife etc. The Bezel insert is glued in the Bezel ring. You have to heat i up ( heatgun oder in hot water ) and pop the insert out. Than re-glue the new insert and put it back together
Following up the question the OP mentioned, anyone have any experience removing the Pelagos bezels? Are they as easy to remove and replace as a sub?

Rep pelagos bezel assembly is the same as rep black bay

https://forum.replica-watch.info/threads/bezel-101-repair-realign-clean.388803/
 

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,134
2,170
113
thanks @k4jun that´s what we were looking for :)

@Rjw252 yes, that´s a goog idea ^^ i asked Puretime what a new bezel insert cost´s. Could we ship our bezels between USA and Germany ? or is there a custom problem ?
 

Rjw252

Getting To Know The Place
25/1/16
80
1
0
No problem shipping. Received a black bay red from Germany member last month. We're good. The pelagos really does look good with some color change on there.

Sent from the RWI App
 

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,134
2,170
113
do you have your blue pelagos ? ok that sounds good :) yes, i think the colour change looks great.
 

RobSe1

goes Deepsea
Supporter
Certified
23/6/17
2,134
2,170
113
Is the Shark a official version from Tudor? can‘t find much on google :/