Thin 67-01 is here!

[rubot1k]

I dont want to derail this thread any further - but please tell me what value your post has if you dont know what you are talking about.

>i express my opinion on how overpriced it is: same cheap movement like 27-05, but only the 27-05 is not expensive
>you said not same movement
>i corrected you because its the same base movement
>you also mentioned 16-02 which i dont have so i dont know

Someone ate your lunchbox today in school?

 

[BIONONE]

>i express my opinion on how overpriced it is: same cheap movement like 27-05, but only the 27-05 is not expensive
>you said not same movement
>i corrected you because its the same base movement
>you also mentioned 16-02 which i dont have so i dont know

Someone ate your lunchbox today in school?

it‘s pretty simple actually - the RM27-05 uses not the same base movement like i told you before. It uses a fake main spring and different balance position.

Want to correct me again without any credibility?

It cludders threads of new releases when people spew non facts as facts. That‘s why i was a bit harsh - sorry for obviously affecting your mood - won‘t happen again :-*

 

[rubot1k]

it‘s pretty simple actually - the RM27-05 uses not the same base movement like i told you before. It uses a fake main spring and different balance position.

Want to correct me again without any credibility?

It cludders threads of new releases when people spew non facts as facts. That‘s why i was a bit harsh - sorry for obviously affecting your mood - won‘t happen again :-*

27-05 and this 67-01 based on Miyota 9015

Old version of it (67-01) few years ago used Miyota 8215

Go ask TDs, watch modders etc then comeback to this thead.

 

[creaven]

Want my first RM rep. Have 1k to spend. This or BBR 35-01 ?

 

[rubot1k]

Want my first RM rep. Have 1k to spend. This or BBR 35-01 ?

Bbr, its like 600 bucks. Best version of 35-01
Dont get the 35-02
If you like this newly released 67-01, better wait for updated versions

 

[MasterWatch]

Rep 10.6mm
Gen is 7.75mm

 

[Reaps]

Rep 10.6mm
Gen is 7.75mm

Surely with a Miyota they can shrink off another 2mm to make it 8.8mm or something like the 15202 ZF.... guess deco plates add the thickness (both dial and movement side)

 

[creaven]

Bbr, its like 600 bucks. Best version of 35-01
Dont get the 35-02
If you like this newly released 67-01, better wait for updated versions

I’ll go with 35-01 for now. But I must admit 67-01 is my dream watch…. Do you know what factory is doing this? Waiting to see next chapters, hope it will not take much time

 

[Dollar_short]

thinner or rear deco, i will take thinner all day every day. but still, 0.417" is not bad

 

[BIONONE]

27-05 and this 67-01 based on Miyota 9015

Old version of it (67-01) few years ago used Miyota 8215

Go ask TDs, watch modders etc then comeback to this thead.

I stand corrected and i have to apologize for my mistake!

Checked again as you recommended and it is indeed a heavily modified 9015.

Sorry for being that ignorant!

 

[rubot1k]

I stand corrected and i have to apologize for my mistake!

Checked again as you recommended and it is indeed a heavily modified 9015.

Sorry for being that ignorant!

Its ok man i really hope they come up with a thinner version, that would be an instant buy. 67-01 has great wearabily

 

[Reaps]

Here's some more photo for you folks, they're appearing now. Honestly slash the price in half to 3000 yuan and they'd get alot more bites. As it stands it's just way too expensive.

 

[Stuart Pitt]

The Miyota 9105 in my XF VC 2000V (8.7mm measured) has been the most accurate movement of all, looking forward to the Ti version of this 67-01 when it's sold by TDs.

 

[Stuart Pitt]

Reaps, where did you get the $905 quote?

 

[Reaps]

Reaps, where did you get the $905 quote?

Non TD that I don't share because he doesn't ship outside of China, never has, never will. With fees and stuff the price is closer to $1100 probably.

There are cheaper non-TDs, you can find, biao, 1688, look around, etc, up to you on your risk profile

 

[SuperLory]

Here's some more photo for you folks, they're appearing now. Honestly slash the price in half to 3000 yuan and they'd get alot more bites. As it stands it's just way too expensive.

This. Watch looks the part at 500$ all considered

 

[Reaps]

This. Watch looks the part at 500$ all considered

Rep factories should hire me as a Management Director, I'll make key executive decisions that will guarantee them sales. All I ask for them is to supply me with 5 rep watches a week so I can have a 1000 watch collection.