So, after so much time searching for good ceramic inserts and trying some different technicques on platinum mods, myself and a friend decided to team up on a little project and source a way to make our own inserts for the Ceramic Subs... This project has been going in the background for some time now trying to get the best cost/benefit ratio with good quality materials, but mostly, sourcing the raw feedstock for our built, and a place to produce it that wouldn´t break the bank, as the base products come from overseas to be sent to another country to be manufactured and then finalized to be ready and sent to us down here...
Today, the first samples have arrived, I must say that the final product looks quite the par, and we were really pleased with the results, getting something that definitely will be worth to upgrade from the stock Noob V8/V9 or any stock insert that comes from our known factories, and yet won´t be as costly as a gen insert.
...The aiming on this project wasn´t only to get a better platinum effect on the engraved numbers, but also, a higher quality ceramic that would produce a "blacker" shine, as we saw that the current ceramic inserts on our reps had something in the black that lacked that "gen-feeling" when standing next to the GENs and although less noticed by some, was a relevant point mentioned by some of the members of our group.
Anyway, let´s jump to the pictures and let them do the talking...
LN:
LN installed on my personal 114060:
LV:
...and below - just for comparison - the "CeraMeister" next to a spongebob insert from a friend of ours, which is IMHO, one of the best aftermarket inserts/platinum mods available for the Sub-C
our "CeraMeister" on the bottom-left, and spongebob on the upper-right:
*****************.com/u7BnooL.jpg
Will come with more info about it soon, as this is very near to be available.. (first batch should come even this week yet)
I would like to hear your thoughts on it, fellas!
Cheers,
Spirit.
Today, the first samples have arrived, I must say that the final product looks quite the par, and we were really pleased with the results, getting something that definitely will be worth to upgrade from the stock Noob V8/V9 or any stock insert that comes from our known factories, and yet won´t be as costly as a gen insert.
...The aiming on this project wasn´t only to get a better platinum effect on the engraved numbers, but also, a higher quality ceramic that would produce a "blacker" shine, as we saw that the current ceramic inserts on our reps had something in the black that lacked that "gen-feeling" when standing next to the GENs and although less noticed by some, was a relevant point mentioned by some of the members of our group.
Anyway, let´s jump to the pictures and let them do the talking...
LN:
LN installed on my personal 114060:
LV:
...and below - just for comparison - the "CeraMeister" next to a spongebob insert from a friend of ours, which is IMHO, one of the best aftermarket inserts/platinum mods available for the Sub-C
our "CeraMeister" on the bottom-left, and spongebob on the upper-right:
*****************.com/u7BnooL.jpg
Will come with more info about it soon, as this is very near to be available.. (first batch should come even this week yet)
I would like to hear your thoughts on it, fellas!
Cheers,
Spirit.
Last edited:
