Just wanted to pass a little info along. When I first got the 305 I immediately scratched the bezel not knowing how sensitive the titanium would be. Not bad, but enough that I would always notice it on my wrist. Looking around the web I found a discussion of how to fix just such a problem. I picked up a block of Garryflex Abrasive 120 grit for 6 bucks off of this site.
http://www.newark.com/garryson/garryflex-block-120-grit/block-120grit/dp/24M2283
It's basically a rubber block with small grit worked in. It arrived today, I cut a small piece off and carefully rubbed the scratched area being sure to go with the grain and it turned out great. You only need a very little but it made the scratch disappear.
I know you'd like pics but in a excited rush I went ahead and used it without thinking of before and after evidence. Sorry, but it works. The site I got the idea from has before and afters and I can point someone there if they are interested.
http://www.newark.com/garryson/garryflex-block-120-grit/block-120grit/dp/24M2283
It's basically a rubber block with small grit worked in. It arrived today, I cut a small piece off and carefully rubbed the scratched area being sure to go with the grain and it turned out great. You only need a very little but it made the scratch disappear.
I know you'd like pics but in a excited rush I went ahead and used it without thinking of before and after evidence. Sorry, but it works. The site I got the idea from has before and afters and I can point someone there if they are interested.