- 27/6/16
- 768
- 2,291
- 93
Hello everyone! I’m Steve.
Previously, most of my comparison reviews have been focused on Rolex, but this time, I want to change directions and talk about a popular Cartier model—the Santos.
In this review, I’ll be comparing the XL Santos model WSSA0018 and examining how the Gen compares to BVF, KOR, AF, and 3K.
I hope this review can provide some valuable insights for those considering a Santos.
Front View
Front View Under Lighting
Due to lighting and angle, there might be slight color differences in the dials across different versions.
To the naked eye, the colors of BV, KOR, and AF are almost identical to the Gen, while the 3K dial appears slightly yellowish.
This could be because it replicates an older version, WSSA0009, or it might be due to different coatings or materials used during replication.
If anyone has more information, feel free to add it in the comments!
Bezel Screw Position
Regarding the screw positions on the left and right sides of the bezel, 3K appears more accurate, while the screws on the other three versions are closer to the bezel edge.
As for the screws at the top and bottom of the case, there are no significant differences among all five.
Crystal View
The Gen crystal sits slightly lower than the bezel, so you can clearly feel the transition between the glass and the bezel when running your finger over it.
In contrast, the crystal on all four replicas is higher than the bezel.
In terms of the frosted area (chamfered edge) of the crystal, AF and 3K have chamfer widths closest to the Gen, followed by BV.
KOR’s chamfer is too transparent, causing distortion in the dial markers in that area.
Dial Markers view
Previously, most of my comparison reviews have been focused on Rolex, but this time, I want to change directions and talk about a popular Cartier model—the Santos.
In this review, I’ll be comparing the XL Santos model WSSA0018 and examining how the Gen compares to BVF, KOR, AF, and 3K.
I hope this review can provide some valuable insights for those considering a Santos.
Front View
Front View Under Lighting
Due to lighting and angle, there might be slight color differences in the dials across different versions.
To the naked eye, the colors of BV, KOR, and AF are almost identical to the Gen, while the 3K dial appears slightly yellowish.
This could be because it replicates an older version, WSSA0009, or it might be due to different coatings or materials used during replication.
If anyone has more information, feel free to add it in the comments!
Bezel Screw Position
Regarding the screw positions on the left and right sides of the bezel, 3K appears more accurate, while the screws on the other three versions are closer to the bezel edge.
As for the screws at the top and bottom of the case, there are no significant differences among all five.
Crystal View
The Gen crystal sits slightly lower than the bezel, so you can clearly feel the transition between the glass and the bezel when running your finger over it.
In contrast, the crystal on all four replicas is higher than the bezel.
In terms of the frosted area (chamfered edge) of the crystal, AF and 3K have chamfer widths closest to the Gen, followed by BV.
KOR’s chamfer is too transparent, causing distortion in the dial markers in that area.
Dial Markers view