Roller CG available?

[moonboom]

I´m looking for a cg with roller for PAM 44mm and PAM 47mm with brushed surface.

I never saw a source for this tiny accessory, but maybe you know a source with Paypal payment and shipment to Germany.

 

[HR911]

Hi,

You can find a new crownguard at the following site:

http://www.jacksontse.com/

They're based in the US....

Good luck

 

[Mambo]

JacksonTSE Ships from Hong Kong

 

[moonboom]

Thanks for your suggestion. I ordered several MM in the past, but never saw him offering CG with roller. I have the next order in place and requested him to offer as well the roller CG.

In case I´m successful I will let you know.

Any other idea where I could find this gem?

 

[hooligan]

Wait, are you looking for a CG that fits a 47mm case with the roller lever?

 

[aardian]

The CG you're talking about started being rolled out for "K" year PAMs, and some late batches of the "J" year. The only place you can get that for now is if you get a gen part (but you gotta pay $500 just for the CG - IF you can source it), although some new models (can't remember which one) that Sead offers over at RG has got the CG lever with the roller ball.

If you just want the lever and want to pay less than $500, get a rep PAM 233. Its CG lever came with the roller.

Trouble is, if you go down that route, NO adjustment can be made by sanding the CG lever tip to properly fit it against the crown.

 

[Drulee]

T4D/PWC offered two PAMs that had a rollerball CG lever and working quick release, the 308 with 7750 and one of the 111 offerings. So they are starting to show up on the factories latest offerings.

 

[moonboom]

That´s right, Drulee.

I saw the CG with roller on an AD frrom T4D. So maybe the CG will become more "standard" in newer version of PAM reps. Shouldn´t be too complicated to manufacture.

 

[hooligan]

No, it's not too complicated to manufacture, as proved by the current reps that offer it.

However, it's only *correct* for a K series (some J series) or newer model, just as aardian stated. Most of our reps are not of models that current.

 

[Drulee]

No, it's not too complicated to manufacture, as proved by the current reps that offer it.

However, it's only *correct* for a K series (some J series) or newer model, just as aardian stated. Most of our reps are not of models that current.

That is until they start pumpin out some J and K series case backs, then a few models could easily be updated by the factory. I guess we'll just have to wait for them to clear out their older series backs

 

[LegendofSpeed]

The only place you can get that for now is if you get a gen part (but you gotta pay $500 just for the CG - IF you can source it),

This is incorrect...They can be ordered in person at the boutique for $200ish... provided you hand them one back (if it's damaged) or when they call you, you ask them to mail it to you....

 

[nielsen]

Checked out that jacksontse web site and didn't see any of the roller CGs. Do you have to ask for them? I like the look of the watches they offer. How's the quality? And the prices?