Removing bezel from a PAM 389

[Pamfanatic]

Dear all,

I hope I'm not duplicating a thread but just to check with you guys on whether is it possible to remove or exchange the rotating bezel of PAM 389?

If there is can anyone guide me along on how to go about it?

Thanks!


Sent from my iPhone using Tapatalk

 

[PAM1983]

There is a thread... it was discussed a few threads back about a week ago or so. Just keep scrolling you will find it

best wishes

 

[PAM1983]

Found it...

https://forum.replica-watch.info/vb...orial-Bezel-on-your-243-V1-or-V2-got-you-down


then there is another link inside this one as well...

 

[Pamfanatic]

Thanks guys for the info shared. That's awesome info and It's gonna be my first time trying to remove parts of a watch that no one will prolly remove. Lol, so if u guys don't mind I would love to double confirm that the method for popping off the bezel of a v6f 389 will be the same as the methods for the 243?

Secondly, My number markers are lined perfectly but it's the minute markers from 12-3 that's irritating me. So I'm gonna swap it with a zf 389. And speaking of this, is the swap possible? Has anyone tried or does anyone know?

Once again thanks a bunch guys!




Sent from my iPhone using Tapatalk

 

[PAM1983]

My only suggestion is when you have them both off compare the underneath teeth/Ridges and see if they are the same... also it wouldn't hurt to measure the inside diameter on both bezels to make sure its a perfect fit. measure the crystal when you get it off too. it will be another double check if you will. good luck. P.S. Document it with pics f you have time. it might just be a great tutorial for others in the near future. cheers

Thanks guys for the info shared. That's awesome info and It's gonna be my first time trying to remove parts of a watch that no one will prolly remove. Lol, so if u guys don't mind I would love to double confirm that the method for popping off the bezel of a v6f 389 will be the same as the methods for the 243?

Secondly, My number markers are lined perfectly but it's the minute markers from 12-3 that's irritating me. So I'm gonna swap it with a zf 389. And speaking of this, is the swap possible? Has anyone tried or does anyone know?

Once again thanks a bunch guys!




Sent from my iPhone using Tapatalk