QC - LONGINES MASTER DAY DATE SS LGF

[peterdeir]

Hello rep fam ,

i have finally pulled the trigger on a couple of watches, i got the ( LONGINES MASTER DAY DATE SS LGF) from TD: puretime i have received qc photos and i need your help for this one as its my first rep.

QC photos: https://imgur.com/a/Fpiybfw

Gen photos : https://www.chrono24.com/longines/master-automatic-day-date-385mm-l27554786--id21837640.htm

thanks

 

[peterdeir]

Hello rep fam ,

i have finally pulled the trigger on a couple of watches, i got the ( LONGINES MASTER DAY DATE SS LGF) from TD: puretime i have received qc photos and i need your help for this one as its my first rep.

QC photos: https://imgur.com/a/Fpiybfw

Gen photos : https://www.chrono24.com/longines/master-automatic-day-date-385mm-l27554786--id21837640.htm

thanks

i have noticed that the strap closure is not parallel ( i am not sure if this is because of the way its held or not ), does anyone have the original who can confirm this as a comparison ?

 

[Cicero]

Please read QC photo rules. If you have a concern post only a picture of that issue and identify the concern.

 

[peterdeir]

thank you, i have read a lot about this but i need confirmation from an expert , the following shows the defects i found, logo on strap seems wrong compared to gen, strap does not close fully leaving a gap, line between date and day is thicker than gen , are these an RL for this model ?

 

[peterdeir]

also the gear color compared to the gen is different ..

 

[domiffm]

The things you mention are not QC issues but inherent to the model. You should read up on this specific model and their general flaws beforehand.