Panerai Pam1616 VSF Loud sound inside from rotor

[Reprookie11]

I received my Panerai VSF pam1616 47mm carbotech. It was making a loud noise from inside from it being an automatic.

I did some research and and I ordered some HP1300 to put on the rotor. I read that it will help from the ceramic bearings that I can hear shaking around and mark it quieter. Has anyone had success with this?

 

[tongsui]

Vsf clone p900 movements are known to be noisy and can have the helicopter effect , I have worked on many and they are the same .

Hp1300 is no magical oil , but it's correct to be used on the rotor bearings, and can reduce the noise a tad . Make sure don't apply too much as it can spread

I have held gen pams and they are not dead silent either .

 

[Reprookie11]

Vsf clone p900 movements are known to be noisy and can have the helicopter effect , I have worked on many and they are the same .

Hp1300 is no magical oil , but it's correct to be used on the rotor bearings, and can reduce the noise a tad . Make sure don't apply too much as it can spread

I have held gen pams and they are not dead silent either .

Do you know of any instructional videos online on how to open the watch?