PAM364 noob - Hand size..... Any help???

[nous]

Hi all,

I'm trying to change movement to my Noob PAM364 from an Asian to a Swiss one
and I'm wandering what size are the Noob hands?
120/200/25/20? Maybe the guru ALE or any other PAM expert can help....:adoration:
I know that watches equipped with the old 21k Asian7750 had no issues with ETA swapping.
Any help appreciated?

 

[nous]

Anyone?

Sent from abroad using TapaTalk

 

[mysterio]

The PAM364 is fitted with the newer 28.8K A7750 so it needs modification to be able to use hands that will fit an ETA movement. I don't have measurements of the hands on the PAM364 (although I do own this rep) so that's about as much help I can give at this point.

 

[nous]

The PAM364 is fitted with the newer 28.8K A7750 so it needs modification to be able to use hands that will fit an ETA movement. I don't have measurements of the hands on the PAM364 (although I do own this rep) so that's about as much help I can give at this point.

Thank you Misterio,
After CNY I'll try to send an email to Noob Fac and see if they can help.
I bet that this modification will not be a problem for Domi though.
For the moment I'll focus on how tol fit the A6497-2 engraved bridges
to my ETA/Unitas 6497-1 movement and after I find proper to change gears from low to high beat.
Fingers crossed

 

[mysterio]

Thank you Misterio,
After CNY I'll try to send an email to Noob Fac and see if they can help.
I bet that this modification will not be a problem for Domi though.
For the moment I'll focus on how tol fit the A6497-2 engraved bridges
to my ETA/Unitas 6497-1 movement and after I find proper to change gears from low to high beat.
Fingers crossed

You'll send an email to where? You must be well connected.

 

[nous]

I'm importing LED lights from Asia and noob is the only well known factory. All other makers except KW are a mysterio.....

Sent from abroad using TapaTalk

 

[d4m.test]

I have fit gen hands on an A7750 rep Panerai movement and rep hands on a gen Panerai 7750. You will need to move the cannon pinion cap over from the rep movement, but that's not impossible.

 

[nous]

Thanks Grimlocktime.....
We learn.... Trying I think

Sent from abroad using TapaTalk