PAM292 N 1:1 Noob - bad wires

[dwbr]

Just got one from Puretime and noted after the first day of use that one of the wire/bar was very loose. In fact, it was broken inside the case.

One plastic tip from the same side was loosen too, no way to get it well fixed and without play. Very poor quality, a very wrong dial (mine is the no pig version)... What a waste of money.. :lolcina:

But the question is... Can I use a set of these PVD wires from Panatime.com with this version?

Tks!

Edit:
http://www.panatime.com/nesetforrawa.html

 

[rickdangerous]

Pics?

 

[dwbr]

sure... pics..

It is not just the plastic tip, it is metal and really broken.

 

[Samkid10]

the ones from panatime will no matched. they are glossy

 

[ALE7575]

Hi dwbr
Firstly try a solution from Puretime

Concerning Panatime I don't know if they are glossy as Samkid says.
Samkid really is a new member (this is his first post) he has not introduced himself and we don't know about his knowledge. Sorry.
If you have no solution from Puretime you should go to panatiem changing all the lugs.
Anyway try to consult someone specialist of PCTeam. Try co-axial or goin for example.

ALE

 

[dwbr]

Thank you for the reply! I will get one from Panatime to see if it works. The rep one has a very poor design (considering a long term use, plastic will not last). Will give it a try as post the results.

Anyway, will try to buy a pig dial... This flaw is very evident.

Hi dwbr
Firstly try a solution from Puretime

Concerning Panatime I don't know if they are glossy as Samkid says.
Samkid really is a new member (this is his first post) he has not introduced himself and we don't know about his knowledge. Sorry.
If you have no solution from Puretime you should go to panatiem changing all the lugs.
Anyway try to consult someone specialist of PCTeam. Try co-axial or goin for example.

ALE

 

[ALE7575]

Thank you for the reply! I will get one from Panatime to see if it works. The rep one has a very poor design (considering a long term use, plastic will not last). Will give it a try as post the results.

Anyway, will try to buy a pig dial... This flaw is very evident.

Keep us informed please

ALE

 

[dwbr]

Hi ALE, just received the pack from Panatime.

The bad news is that the rep has the wrong angle formed by the holes. No way to change the wire's angle without messing the PVD coating.

Also, screws from Panatime will not fit (has o'rings, much better quality... but not enough length.).

So, to everyone with a PAM292 from Noob, take care of it or will have a nice pocket watch...

Will try to contact Puretime and ask for some spares.

 

[Perry]

Just return the watch! Out of the box quality issues should be immediately addressed by the dealer no questions asked!!!

 

[dwbr]

Fixed the angle and all OK now. Returning the watch is not an option from here.
And fixing these small issues is part of the game/hobby...

Just return the watch! Out of the box quality issues should be immediately addressed by the dealer no questions asked!!!