-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
PAM1313 [TTF]
- Thread starter KOT1917
- Start date
Just a promo photo of gen cut in photoshop for now, but it will be very interesting to see what they have to offer, considering that VSF did a brilliant job with this model.
Interestingly, before the raids PAM1313 VSF cost about $350, and now for this price they offer TTFs that are far behind, for example, PAM1312, while VSF is now offering closer to $500.
Seemingly a good illustration of how we, as an end user, have suffered from raids, as a $350 model quality.
I would really hope that for PAM1313 TTF will do better than for some other models.
Interestingly, before the raids PAM1313 VSF cost about $350, and now for this price they offer TTFs that are far behind, for example, PAM1312, while VSF is now offering closer to $500.
Seemingly a good illustration of how we, as an end user, have suffered from raids, as a $350 model quality.
I would really hope that for PAM1313 TTF will do better than for some other models.
Last edited:
Let's wait and see, I haven't written TTF off completely yet. The eSteel series is atrocious, but the TTF 1314 was a real glimmer of hope. And they obviously have the Quick Change system in their programme now.
I support.
Your positive attitude towards this factory is contagious.
I really hope that it will be at the best level and they will fill their niche, so you can just choose to have a clone for +150$ with VSF or stay with TTF and 7750 for less, without sacrificing quality in other aspects.
Your positive attitude towards this factory is contagious.
I really hope that it will be at the best level and they will fill their niche, so you can just choose to have a clone for +150$ with VSF or stay with TTF and 7750 for less, without sacrificing quality in other aspects.
papabear244
Renowned Member
- 17/11/20
- 527
- 157
- 43
I also would like to voice my support, we need a viable alternative to VSF.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
DkHelmet
Getting To Know The Place
Looks good, maybe a bit thicker than the VSF 1313 and not using the Clone MVT but if you don't want to pay the extra for the VSF this looks to be a decent option now, esp. with a working quick release.
It seems to be the difference from VSF in thickness, according to measurements JayBee0815 15 are about 0.5 mm, which is generally not critical.
But case number 7233 does not match PAM1313.
7310 for W series and later 7393 correspond to this and neighboring models (eg PAM1314).
But case number 7233 does not match PAM1313.
7310 for W series and later 7393 correspond to this and neighboring models (eg PAM1314).
Last edited:
Hazing
And So It Begins... Again
- 9/5/19
- 5,185
- 4,441
- 113
Oh wow. This doesn’t look bad. The cutout of the numerals and indicies looks a little thicker but the dial doesn’t look bad, the dial print looks good. The case shape has a few lines slightly different from the gen but this looks like a decent attempt. Less the case back of course.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk