Pam000 H-Fac Photoshoot (Pics Heavy)

[nigelgel]

Hi guys, I got this 000 H-fac from Sead few months back. Bought a Gen pam strap and paired them both together.
Hopefully these pictures will help in reviews. I'm not good with words and comparison so let's proceed to the photos.

http:\/\/s10.postimg.org\/jlgbib8c9\/Pam000_1.jpg

Have a good weekend guys!

 

[lmmo]

Beautiful photos and beautiful watch.

 

[hublotkingpower]

Getting harder and harder to resist buying one and fitting it with the dial with a V4 case.. How's the lume application btw? Smooth or rough?

Enjoy your 000

Sent from my KW iPhone V3

 

[kilowattore]

Beautiful watch and strap, great choice!

 

[nigelgel]

Getting harder and harder to resist buying one and fitting it with the dial with a V4 case.. How's the lume application btw? Smooth or rough?

Enjoy your 000

Sent from my KW iPhone V3

The lume is great! It won't last long but it lume up nicely when you brought in from outdoor to indoor. I think it lasted roughly around 10 mins. Not sure is that normal or not.

 

[nigelgel]

Thanks Immo and kilo

 

[PAM1983]

Nice combo...Ill post pics soon of my modded H Fac case. I fixed the bezel issue and rounded a few of the sharp edges... Its a great watch.

 

[nigelgel]

Nice combo...Ill post pics soon of my modded H Fac case. I fixed the bezel issue and rounded a few of the sharp edges... Its a great watch.

Oh yes please. Do post ur process as well If it's possible. More concern on the bezel issue.

 

[PAM1983]

Ok guys and gals... here it is. The Modded H-Fac case done by me. Lots of hours went into this and though its not 100% perfect Id like to think it is perfect enough for me to wear around and feel happy about it. I pulled the Dial out to service it. Ive learned a lot the past few months. Here You Go !

 

[PAM1983]

A few more...

 

[BirkinTourbillon]

Ok guys and gals... here it is. The Modded H-Fac case done by me. Lots of hours went into this and though its not 100% perfect Id like to think it is perfect enough for me to wear around and feel happy about it. I pulled the Dial out to service it. Ive learned a lot the past few months. Here You Go !

Nice work buddy. What did you use to reshape the case?

"Tienes que correr riesgos, en esta vida"

 

[BirkinTourbillon]

Hi guys, I got this 000 H-fac from Sead few months back. Bought a Gen pam strap and paired them both together.
Hopefully these pictures will help in reviews. I'm not good with words and comparison so let's proceed to the photos.













Have a good weekend guys!

Thanks for sharing mate. That combination looks sharp. Is that a gen asso strap?

"Tienes que correr riesgos, en esta vida"

 

[PAM1983]

I used a step by step process of wet sanding with 600 grit to get aggressive on the sharp edges followed up by 2000 grit and then finishing with a 2500 grit. ALL WET SANDING BY HAND one side at a time. Always looking at a Gen to try to get it as correct as possible.

Notice the Bevel shape and mirror is no longer straight reflection and now has the S curve. I need to use a buffer wheel to get the final polish on it. Not bad if I say so myself. :thumbup::thumbup::thumbup::thumbup::thumbup:

 

[ALE7575]

Unfortunately new H maker Luminor Bettarini 44mm case needs this nice job to get really accurate
Congrats
ALE

 

[T3RM1N4T0R]

Yup the only complaint I have with my 000 new H factory case is the extremely straight high polished edge on the bezel where it meets the case. Dial however makes up for it, it is extremely nice

sent from my noob Samsung V5

 

[PAM1983]

Unfortunately new H maker Luminor Bettarini 44mm case needs this nice job to get really accurate
Congrats
ALE

Thank you Ale.

 

[PAM1983]

I'm getting another H Fac case in soon. I'm going to mod it and I will post Step by Step instructions with pictures and what I used to mod it. Tutorial of how to make the case Gen Like. Stand bye.

 

[ALE7575]

I'm getting another H Fac case in soon. I'm going to mod it and I will post Step by Step instructions with pictures and what I used to mod it. Tutorial of how to make the case Gen Like. Stand bye. ?

This would be appreciated

As a recommendation I would be more careful with the uniformity of the rounded of the transition edge of the bezel. See the reflections
The bet way is make the job in a lathe or some device like that
Always turning the bezel in some way if possible

ALE

 

[PAM1983]

This would be appreciated

As a recommendation I would be more careful with the uniformity of the rounded of the transition edge of the bezel. See the reflections
The bet way is make the job in a lathe or some device like that
Always turning the bezel in some way if possible

ALE

Yeah the bezel edge is just slightly over what i wanted but is very close if you see it in person. All good though.

 

[BirkinTourbillon]

I used a step by step process of wet sanding with 600 grit to get aggressive on the sharp edges followed up by 2000 grit and then finishing with a 2500 grit. ALL WET SANDING BY HAND one side at a time. Always looking at a Gen to try to get it as correct as possible.

Notice the Bevel shape and mirror is no longer straight reflection and now has the S curve. I need to use a buffer wheel to get the final polish on it. Not bad if I say so myself. [emoji106][emoji106][emoji106][emoji106][emoji106]

Thanks for sharing mate, would love to see the step by step on how to do it[emoji4]

"Tienes que correr riesgos, en esta vida"