PAM 127 and Dust under the glass

[paneristiforever]

Hello!

There ist dust unter the top glass of my PAM127 Fiddy. How can i remove the glass?
Maybe someone can give me a detailled instruction.

Thank you!

 

[decker6869]

is it a custom 127 like from marlin or is it a straight factory piece? I ask because if its from marlin you can always have him fix it.

 

[svshawn]

From a great guy and friend here that helped me. @chris3007. Hope this helps you. It worked for me like a charm.

 

[spankster23]

Here's the thing though, you will need a very strong Xl crystal press to put that bezel back on the watch correctly to keep it straight, sealed and water tight. I would remove the movement and clean it that way. Much easier and less intrusive.
Caseback opener, and a 2mm screw driver. Some silicone grease.
Remove caseback.
Remove crown guard screws, remove crown guard
Put crown in winding mode, Loosen small screw beside the crown 2 turns. Pull out crown.
Remove 3 screws and tabs holding movement.
Gently turn watch over and the movement will "fall out".
Clean dial with air, clean crystal with lens cleaner, and put back together in reverse order.
Use silicone grease on the crown rubber gasket, a little on the crown tube gasket, and on the caseback gasket.

 

[chris3007]

Here's the thing though, you will need a very strong Xl crystal press to put that bezel back on the watch correctly to keep it straight, sealed and water tight. I would remove the movement and clean it that way. Much easier and less intrusive.

Sorry, but it don’t work with a 127 that way.
The 127 is a top-loader. So you can’t remove the movement from the back case, just from the top, the crystal side.

And it’s very easy to press the 127 bezel back to the watch. You can do it without a tool.

 

[spankster23]

Sorry, but it don’t work with a 127 that way.
The 127 is a top-loader. So you can’t remove the movement from the back case, just from the top, the crystal side.

And it’s very easy to press the 127 bezel back to the watch. You can do it without a tool.

You learn something everyday. I swore on the older ones, cartel with the same millisimation number, you went through the back like a 111, or 372.

 

[chris3007]

I also learn every day something new here. That’s why I love RWI [emoji51]

 

[decker6869]

I am not sure how helpful this video will be but it looks pretty good for anyone interested in taking out the movement.

https://www.youtube.com/watch?annot...2t4PHjuTvmv&src_vid=jFV1N5FKkT0&v=65nta3Ry4qQ

 

[decker6869]

Also, here is his first video on that series where he mentions letting the main spring tension unwind. He also shows how to decase the movement in this video as well. I found it pretty helpful but your mileage may vary!

https://www.youtube.com/watch?v=jFV1N5FKkT0&t=428s