Here's another 1243 build, gentlemen. Brand new. Hope you'll like it. Feel free to ask any questions.
Details:
- High quality 45mm SS case, reshaped, softened edges. It was completely unassembled so that every part could be appropriately prepared and delicately microceramic-blasted and partially polished to have a "patina steel" finish. Carefully performed EILEAN engravings. Improved water-resistance.
- Crown with engraved logo.
- High-dome mineral crystal. No AR coating.
- Engraved CB with alu insert press-fitted and fixed into the caseback from inside.
- Completely serviced (washed, cleaned, polished, oiled, re-assembled, adjusted) genuine Swiss Unitas movement.
- H3 CP/HW set installed.
- Flattened and polished cannon pinion.
- Movement holders made to firmly secure the movement in the case.
- Melange brown dial with grooves. Vertical brushed pattern which makes the dial to change its hue depending on light conditions - from melange to deep brown. Following the Eilean legend the dial surface mimics yacht deck board. Ultra flat and smooth glossy finish.
- Custom made 0.3mm brass backplate. Stamped with model number. Soldered dial feet for the Unitas movement.
- Short Cali brass hands. Minute hand tip is bent towards the dial, as per gen.
- Cream lume.
- Titanium lug tubes.
- Custom made 26x24mm brown vintage leather strap. Size is 130mm x 80mm.
- 24mm removable buckle, engraved and microceramic-blasted.
Details:
- High quality 45mm SS case, reshaped, softened edges. It was completely unassembled so that every part could be appropriately prepared and delicately microceramic-blasted and partially polished to have a "patina steel" finish. Carefully performed EILEAN engravings. Improved water-resistance.
- Crown with engraved logo.
- High-dome mineral crystal. No AR coating.
- Engraved CB with alu insert press-fitted and fixed into the caseback from inside.
- Completely serviced (washed, cleaned, polished, oiled, re-assembled, adjusted) genuine Swiss Unitas movement.
- H3 CP/HW set installed.
- Flattened and polished cannon pinion.
- Movement holders made to firmly secure the movement in the case.
- Melange brown dial with grooves. Vertical brushed pattern which makes the dial to change its hue depending on light conditions - from melange to deep brown. Following the Eilean legend the dial surface mimics yacht deck board. Ultra flat and smooth glossy finish.
- Custom made 0.3mm brass backplate. Stamped with model number. Soldered dial feet for the Unitas movement.
- Short Cali brass hands. Minute hand tip is bent towards the dial, as per gen.
- Cream lume.
- Titanium lug tubes.
- Custom made 26x24mm brown vintage leather strap. Size is 130mm x 80mm.
- 24mm removable buckle, engraved and microceramic-blasted.
