New rep of PAM422 with P.3001 clone?

[lmmo]

I'm not an expert but PureTime has uploaded this video of a PAM422 with a great looking P.3001 movement.

Is this a new rep?

http://www.replicawatchvideo.com/uploads/videos/db0b5729.mp4

 

[nalomb]

That actually doesn't look too bad -- other than the typical, the biggest callout to me was the misspelling of "Jewels."

 

[lmmo]

That actually doesn't look too bad -- other than the typical, the biggest callout to me was the misspelling of "Jewels."

Jesels... :cry2:

 

[lmmo]

 

[PeterRei]

Yep, but "Panerai" is still printed on that dial

 

[lmmo]

Yep, but "Panerai" is still printed on that dial

Correct. The dial looks bad, not only because of the printed PANERAI, but also the color of the lettering seems far from the gen.
And of course, they need to fix the "jesels" in the movement.

 

[Mea Culpa]

Correct. The dial looks bad, not only because of the printed PANERAI, but also the color of the lettering seems far from the gen.
And of course, they need to fix the "jesels" in the movement.

There are two versions of the newer Pam 422 – Version 2, one is made by KV/V6 Factory, don’t know where the other is made from – not sure if it’s H Factory, both are available from most TDs.

1. The version with the 3 day power reserve indicator has a P3000 Movement, dial is off, jewels misspelled and movement is a mere -6497-2 at 18000vph. Click HERE for more details.

2. The KV/V6 version does not have the 3 day power reserve indicator, it shares the same P3000 Movement, dial is way better and movement is at 21600vph. Click HERE for more details.

Suffice to say I have the KV/V6 version and it’s amazing!

 

[lmmo]

There are two versions of the newer Pam 422 – Version 2, one is made by KV/V6 Factory, don’t know where the other is made from – not sure if it’s H Factory, both are available from most TDs.

1. The version with the 3 day power reserve indicator has a P3000 Movement, dial is off, jewels misspelled and movement is a mere -6497-2 at 18000vph. Click HERE for more details.

2. The KV/V6 version does not have the 3 day power reserve indicator, it shares the same P3000 Movement, dial is way better and movement is at 21600vph. Click HERE for more details.

Suffice to say I have the KV/V6 version and it’s amazing!

Check the video.
The watch in the video is none of the one you pointed out.

 

[Mea Culpa]

Check the video.
The watch in the video is none of the one you pointed out.

Don't know what you are referring to @Immo, is there something which i've missed out?

Did you check the video and the watch description listed on Angus' website?

 

[lmmo]

Don't know what you are referring to @Immo, is there something which i've missed out?

Did you check the video and the watch description listed on Angus' website?

Yes, I did check. But it seems that you didn't pay to much attention to the video.

The movement is totally different.


Movement of the watch in the video:

Movement of your option #1

Movement of the V6f version:

 

[d4m.test]

There are two versions of the newer Pam 422 – Version 2, one is made by KV/V6 Factory, don’t know where the other is made from – not sure if it’s H Factory, both are available from most TDs.

1. The version with the 3 day power reserve indicator has a P3000 Movement, dial is off, jewels misspelled and movement is a mere -6497-2 at 18000vph. Click HERE for more details.

2. The KV/V6 version does not have the 3 day power reserve indicator, it shares the same P3000 Movement, dial is way better and movement is at 21600vph. Click HERE for more details.

Suffice to say I have the KV/V6 version and it’s amazing!

The color of kw version looks funny? Or is it just the video?

 

[NickOT]

is there some monopoly on who has access to the P3000 superclones? or are the factories going back to the 6497?
I am pretty sure there was a watch with a P3000 superclone with seconds hand. these are all just decorated 6497

 

[ALE7575]

The rep in the Video has no P.3000 Clone based movement
Gen P.3000 and P.3000 Clone have both balance wheel @7
Movement in Video has Balance wheel @11. It is A6497 based, like old movement but with improved decoration of the balance cock with two points of fixation (like gen P.3000) and more accurate plates decoration of bridges

ALE

 

[mskwatch]

What a pity

 

[PeterRei]

is there some monopoly on who has access to the P3000 superclones? or are the factories going back to the 6497?
I am pretty sure there was a watch with a P3000 superclone with seconds hand. these are all just decorated 6497

Yep, 375 SF. But never really sold well

 

[kilowattore]

is there some monopoly on who has access to the P3000 superclones? or are the factories going back to the 6497?
I am pretty sure there was a watch with a P3000 superclone with seconds hand. these are all just decorated 6497

Only SF and ZF are releasing reps with the clone P3000 movement. ZF PAM 510 recently released has seconds subdial and is based on the same movement imo.

 

[PeterRei]

Only SF and ZF are releasing reps with the clone P3000 movement. ZF PAM 510 recently released has seconds subdial and is based on the same movement imo.

Yep, decorated P3000SC. Too fat for a slim case

 

[mikeys818]

anyone know if a new rep of this has been released?

 

[indywatchguy]

Yes better version check Puretime


Sent from my iPad using Tapatalk