New member looking for Omega Planet Ocean replica

[kter]

Hi all

Im all very new to this but Ive been looking around for a good replica Omega Seamaster planet ocean

any suggestions as to where I could get a decent quality one?

 

[Seifert]

Hello and welcome. I'm sure you will find this forum interesting

If you want a good decent PO i suggest you contact Narikaa. He can hook you up with a good A21j PO.

But again, it depends on where you are located, how good a rep you want it to be and how much you are willing to spend.

Good luck

 

[kter]

thanks mate.

im located in australia and was looking to spend approx us $350max

i was looking at some POs i found on a few random sites, but did a bit fo research and found they were dodgy. lucky i checked here

 

[fakemaster]

Whoa $350? No need for that.

 

[trksh-bzr]

350.....you'll be hooked up with a great rep at that price...... youll find really good ones from 100 bucks n up!!

 

[Seifert]

I don't know much about the costom risk in Australia, but i presume they are relatively low, therefor you can order from many of the trusted dealers on this site.

$350 is pretty much. You can get a decent 21j PO for about $100, but you can also aim higher and choose the UPO (Ultimate Planet Ocean) with the Asian ETA 25j, which is a very very nice watch. I think this one is about $225, but ask around the trusted dealers

 

[WatchDoc]

I don't know much about the costom risk in Australia, but i presume they are relatively low, therefor you can order from many of the trusted dealers on this site.

$350 is pretty much. You can get a decent 21j PO for about $100, but you can also aim higher and choose the UPO (Ultimate Planet Ocean) with the Asian ETA 25j, which is a very very nice watch. I think this one is about $225, but ask around the trusted dealers

Been reading a lot about this, but would apprec help understanding balancing cost vs. value on the PO or UPO. What I understand so far is that higher cost reps will have sapphire instead of mineral crystal; the 21j movements are cheap/easy to replace but might not be as reliable as an ETA clone that will cost more, but the ETA is more serviceable (correct?); but are there other features that I should take into account as I consider getting a PO or UPO?
Thanks

 

[kter]

hi all

thanks so much for the responses - certainly helps me get my head around it all

as for customs, australia is notoriously tight with foodstuffs etc - dont know how this would translate into replicas though

and on that note, how do i contact these trusted dealers? ive been looknig around ive seen a couple members with "trusted dealer" tags like silix and fakemaster - do i just drop them a personal message?

thanks

 

[Seifert]

Been reading a lot about this, but would apprec help understanding balancing cost vs. value on the PO or UPO. What I understand so far is that higher cost reps will have sapphire instead of mineral crystal; the 21j movements are cheap/easy to replace but might not be as reliable as an ETA clone that will cost more, but the ETA is more serviceable (correct?); but are there other features that I should take into account as I consider getting a PO or UPO?
Thanks

The UPO is much more accurate regarding details such as He valve, dial and case. It is much more gen like, and yes, it also have sapphire crystal, but so does mine Narikaa PO.

No doubt that I would choose an ETA (clone ETA). It is more reliable and it has 25 jewels and ticks at 8bps (28.800bph) vs. A21j with 6bps (21.600bph). In my eyes, that is the biggest noticeable difference in the movement, unless you open it.

Regarding the trusted dealers, you just go to the trusted dealer section and look around. Most of them have their own web pages, where you can brows different watches. You can also PM them.
Just notice where your watch will be shipped from, that's the most important part due to costom risk.

Hope it helps

 

[WatchDoc]

Kter, you ever take the plunge?

 

[jonasprivate]

hi all

thanks so much for the responses - certainly helps me get my head around it all

Best version. http://www.replicamake.com/product_info.php?cPath=79_153&products_id=2318

 

[WatchDoc]

the 42mm replicamake version has longer hour hands that are typically shorter on other rep models