Need Help destroyed Pam??

[power007]

I bought Pam with the following upgrades FGD 040 (Sead CG, T48, ECT) with movement 6497. I lost the clock on the floor and the minute pointer and the second needle has come out of place. wonder if the clock is completely destroyed?

I've been to a lot of watchmakers in Norway, Oslo and none of them want to fix it since it is a replica. I really need help ... attaching pictures of the clock

 

[midasmook]

Is it still ticking? I'm sure there are plenty modders on the boards who can fix it. If need be you can put a new movement in it.

 

[power007]

Is it still ticking? I'm sure there are plenty modders on the boards who can fix it. If need be you can put a new movement in it.

Its still ticking, would like to repair it...

 

[andreww]

Just find a local watchsmith and take it in. Its a fairly simple repair, decase the movement, reset the hands, and put it back together.

 

[RobbDizzle]

The hands just need to be reattached and the movement checked for impact damage. Not destroyed at all.

 

[slimslim]

someone in the eu should be able to fix it for you. who? i have no idea. ask around. it looks fixable....good luck

 

[RobbDizzle]

You could even DIY if you have any aptitude with working on watches, since you're not disassembling the movement or anything. You just need a hand press to get them back on.

 

[power007]

is it difficult to open the watch? hope the watch will be as before, I really like this watch

You could even DIY if you have any aptitude with working on watches, since you're not disassembling the movement or anything. You just need a hand press to get them back on.

 

[RobbDizzle]

Not difficult to open the case at all, but that's the easiest part...

1) Open caseback, using tool, sticky ball, or ball of masking/duct tape
2) Remove CG
3) Remove stem (loosen retaining screw 1-2 turns, pull out stem)
4) Loosen movement mounting tabs, uncase movement
5) Press hands back on with hand press
6) reassemble in reverse order

 

[taiji]

Contact takashi.

He can help you fix the hands back plus I think you can also upgrade with a single AR to the inner crystal. You will be stunned at the result.

Try Takashi. Reliable guy.

 

[power007]

I have upgraded the movment to 6497-2 ETA but under install I have destroyed the movment (it does not tick) and I have also destroyed the pointers and the dialed is scraced

So now my pam needs a new movment 6497-2 ETA (is there a better movment?) and it also needs new pointers and new dialed that looks as close to the real deal. Also I want you to upgrade wih a single AR to the inner crystal.

Do you guys think I need more upgrades?

and who can do this for me? I have sent message to takashi, but I have not received a reply from him yet.

 

[karesz501]

in the EU!

Man, that DIY went a bit wrong... No worries, shit happens all the time. Why not buy a cheapo noob rep and exercise on it? Next tim will be better!

If you want to keep it in the EU and get a trustworthy modder, just contact Fine_dd (Uwe), he is a trusted watchsmith here on RWI. He does a wonderful AR as well if you need it.

I have upgraded the movment to 6497-2 ETA but under install I have destroyed the movment (it does not tick) and I have also destroyed the pointers and the dialed is scraced

So now my pam needs a new movment 6497-2 ETA (is there a better movment?) and it also needs new pointers and new dialed that looks as close to the real deal. Also I want you to upgrade wih a single AR to the inner crystal.

Do you guys think I need more upgrades?

and who can do this for me? I have sent message to takashi, but I have not received a reply from him yet.

 

[watchloover]

send it to speedy