• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Looking for 16600 expert

Futzorr

Renowned Member
DO NOT TRADE WITH ME
15/8/19
516
167
43
EU
Hi all,

I recently bought a 16600.
hoping someone can identify the case set. It was mentioned as “unknown” in the sale description.

also would like to know if anyone know how an insert change is done - same way as 16610? Or does it require a different technique?

photos incoming in next post
 

Seadwellermike

Proud RWI Supporter
Banned
Certified
The SEL fitment underneath does not look BP to me, nor the profile. Dunno, just doesn’t look like a BP and I’ve had 3 of them.

also, the insert pops out, new one pops in. Be warned: the only insert that will fit is a No Date sun (14060) or SD 16600. The Date Sub 16610 will not fit, and 99.9% of the replacements you’ll find are for date subs.
 

Futzorr

Renowned Member
DO NOT TRADE WITH ME
15/8/19
516
167
43
EU
The SEL fitment underneath does not look BP to me, nor the profile. Dunno, just doesn’t look like a BP and I’ve had 3 of them.

also, the insert pops out, new one pops in. Be warned: the only insert that will fit is a No Date sun (14060) or SD 16600. The Date Sub 16610 will not fit, and 99.9% of the replacements you’ll find are for date subs.

thanks!
the bracelet is a 16610 (93250) one. So not orig for the watch. Perhaps that explains the SEL?
i saw a modding guide from years ago where a member shaved the insert to match his bp correctly because it also popped. Could it be an old bp case?
it supposely has an eta inside and not the 3135 movement. Not sure if that makes identifying the case easier?
 

d4v3

Renowned Member
DO NOT TRADE WITH ME
Banned
20/3/13
912
265
63
Aparently previous models of the 16600 fropm BP had the caseback that has the "Original gas Escape..." NOT CENTERED, the newers show it centered
The mythical BPSD came with an asian clone 2836
CGs seems a bit chunky but can be modded drilling lugs its another cool mod
in my "new" BPSD the crown seems to have the same hight as yours and looks centered

my 5 cents, hope some expert chime in
 

Seadwellermike

Proud RWI Supporter
Banned
Certified
thanks!
the bracelet is a 16610 (93250) one. So not orig for the watch. Perhaps that explains the SEL?
i saw a modding guide from years ago where a member shaved the insert to match his bp correctly because it also popped. Could it be an old bp case?
it supposely has an eta inside and not the 3135 movement. Not sure if that makes identifying the case easier?

it might explain it, but I’m not sure. It just appears off to me, and again, I’ve had 3, and LIVE in the BPSD thread and have for years. I could be wrong. What’s the clasp code? Is there one? I know it’s for a sub, but maybe it will indicate a timeframe or some other clue (no rock unturned) and have you opened it or are you speculating? The inside may tell more of a story.
 

Futzorr

Renowned Member
DO NOT TRADE WITH ME
15/8/19
516
167
43
EU
it might explain it, but I’m not sure. It just appears off to me, and again, I’ve had 3, and LIVE in the BPSD thread and have for years. I could be wrong. What’s the clasp code? Is there one? I know it’s for a sub, but maybe it will indicate a timeframe or some other clue (no rock unturned) and have you opened it or are you speculating? The inside may tell more of a story.

Just glad you’re actually replying and putting an effort on this one :)

the clasp code is x9, model: 50190

i havent actually been able to take the caseback off and check movement. But if you scroll up to the sales link, the seller provided a picture of the movement. However its not a good picture. Im not an expert but i thought the ETA’s looked different.
i planned to open the caseback and ordered one of those bergeon balls to unscrew casebacks, but its to tight for me to open it
 

Futzorr

Renowned Member
DO NOT TRADE WITH ME
15/8/19
516
167
43
EU
You can use a ball of duct tape or packing tape, sticky side out, make it big, and press and spin the caseback off. The ball works well, but you don’t need it.

Tried alle these 3 methods now. Cannot open the caseback - goddamn its super tight
 

Futzorr

Renowned Member
DO NOT TRADE WITH ME
15/8/19
516
167
43
EU
Finally worked. All it needed was abit of cursing.

pics incoming.
 

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,595
113

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,595
113
and its missing a movement clamp and screw
 

Futzorr

Renowned Member
DO NOT TRADE WITH ME
15/8/19
516
167
43
EU
As the movement showed to be fake..

can anyone verify if the insert is fake or gen?
it was stated as gen in the m2m sale.

it was easy to take out. Came right off. Looks like it has been glued on some time ago.

pics incoming
 

StreetFighter

Insert Coin
4/9/20
2,880
3,455
113
Here’s gen to compare. It has 3 flat surfaces on the rear. Can’t quite make out if yours has.