Loctite on CG screws?

[Antroz_50]

Just wondering has anyone used this to secure the crown guard screws into the case before?

thanks

 

[Woundup]

Yes - but make sure you use the blue loctite and NOT red...

 

[jonnybaws]

Yes - but make sure you use the blue loctite and NOT red...

This, I also use it for the wire lugs on my Rads, when doing that, make sure you're happy with the strap you're going to mount, once glued its a pain to unglue...

 

[Antroz_50]

Thankyou both, after checking a bit more I think I will use 242 on the crown guard screws and 222 for the lug screws

 

[kramerica72]

Thankyou both, after checking a bit more I think I will use 242 on the crown guard screws and 222 for the lug screws

I use the purple on mine--enough resistance where they won't back out on their own

 

[Antroz_50]

Did you use purple for the CG screws too or just lug screws?

thankyou

 

[kramerica72]

Did you use purple for the CG screws too or just lug screws?

thankyou

Both. Should be more than sufficient unless you operate a jack hammer or heavy equipment for a living

 

[ALE7575]

Please note that LOCTITE 243 is an improved verison of LOCTITE 242
This is correcct for CG screws

LOCTITE 222 is enough for lug screws


ALE