KW388

[pkw2704]

Quicky , is there is only KW doing this version of pam??

 

[mysterio]

Quicky , is there is only KW doing this version of pam??

Currently, yes.

 

[kepture]

Though, Have not heard of any reviews regarding the new 388 with A7750...
Wonders if kw have done anything for the lug screws.
Also from dealer's pics, it seems to me the crown tube length is slightly longer

 

[pkw2704]

Right order placed ,V2 but i am sure it will do the job:cheese:

 

[ALE7575]

This is the only version as mysterio has already said

Following KW information, they have changed movement and fixed lug screws issues
We will see
ALE

 

[pkw2704]

Its the waiting thats the killer.......:hehehe:

 

[mintmanin]

i just ordered mine since kw 312 is not available i am getting this hope this is good.

 

[pkw2704]

with all the raving about this i hope its the dogs dangles,anything I need to check for ?looked at the info on this model and all seems ok

 

[marcogumbo]

with all the raving about this i hope its the dogs dangles,anything I need to check for ?looked at the info on this model and all seems ok

Yes, Pkw...check for decorative parts that are glued on to the rotor coming loose. There is a small center-plate and 3 decorative screw-heads (not screws) glued onto the center of the rotor, and I have seen now at least 3 cases of some of those parts coming loose. In my case, one of the screw-heads had jammed inside the movement, stopping the watch.

 

[pkw2704]

thanks, the only problem is i can't check for this till the watch lands ,so I have to accept QC and then keep my eye on them.What did you do when yours fell off? reglue them?

 

[marcogumbo]

thanks, the only problem is i can't check for this till the watch lands ,so I have to accept QC and then keep my eye on them.What did you do when yours fell off? reglue them?

I had to disassemble the rotor assembly, and remove the large decorative (P9000) plate, to get to the 7750 movement to dislodge one of those little screw-heads you can see on the rotor from the movement. After this, the watch started running...and has been running well, and keeping great time.
I left them off...and removed the last screw-head that was still on.
I have seen so far 3 of these watches (505 and 388 V2) with this issue.